Parts for WS30001 — InSinkErator Dishwasher

We found 16 parts confirmed to fit the InSinkErator Dishwasher WS30001.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on WS3000-1: 51621 (Insulation), 51125 (Control Arm), 51121 (Control Arm), 51627 (Retainer Ring), 51129 (10tx 48t Gea), 51523 (Lawn & Garden Equipment Slotted Washer), 51285 (Casing Back), 51272 (Bowflex Leg Cable), 51219 (Snapper Drive Disc A), 139010505 (INNER DOOR GLASS), 5304516160 (Kelvinator Cooking Appliance Surface Element).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on WS3000-1: 51534 (CLIP-ARM GUARD (4) (FRONT AND REAR LOCATIONS)), 649040660638 (Tiller Handle, Upper).

Interior lighting

Symptom: The interior light doesn't turn on when the door opens.

Check: Confirm power is reaching the socket, then check the door-activated light switch before assuming the bulb itself is at fault.

Parts in this group on WS3000-1: 51302 (INSULATOR-LIGHT PKG).

Drive system (belts, pulleys, motors)

Symptom: A dish rack, spray arm, or wash-motor component isn't turning or sliding the way it should.

Check: Check that the part in question turns or slides freely by hand, and look for a cracked, worn, or seized point where it should pivot or roll.

Parts in this group on WS3000-1: 51198 (Pulley).

Controls, timers and wiring

Symptom: A cycle that stops partway through, an error code or blinking light, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on WS3000-1: EBR74796404 (Refrigerator Electronic Control Board).

Before you buy

Match WS30001 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dishwashers, the model and serial plate sits on the edge of the door or the tub rim. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring InSinkErator Dishwasher models

These model numbers sort next to this one in the catalog and are usually the same product family.

• WS3000-2 — 25 parts
• WS3000-3 — 32 parts
• WS400 — 33 parts
• WS400-1 — 34 parts
• WS400-2 — 16 parts
• WS3000 — 32 parts
• CLSUP-7 — 14 parts
• CLSUP-6 — 20 parts
• CLSUP-5 — 7 parts
• CLSUP-4 — 16 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.