Parts for WS4001 — InSinkErator Dishwasher
We found 34 parts confirmed to fit the InSinkErator Dishwasher WS4001.
Compatibility table
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on WS400-1: 51623 (Insulation), 51609 (Skirt Guard), 51580 (TANK AND FRAME ASSEMBLY (WS850, 1 AND 2) (NOT SHOWN)), 51647 (BIMETAL ASSEMBLY (BLK) (USED ON WS400-2, 3 AND WS850-2, 3)), 51512 (BLOWER ASSEMBLY KIT (INCL. CODES 9 THRU 16)), 51482 (HOSE-FLEXIBLE KIT(FILL VALVE TO AIR GAP) (INCLS. CODES 2 AND 6)), 51601 (IMPELLER AND SEAL KIT (INCL. CODES 5-8)), 51132 (RECEIVER-MANIFOLD), 51069 (STANDPIPE-OVERFILL), 51257 (Square Nut), 51121 (Control Arm), 51122 (JVC S/m Av2072), 51129 (10tx 48t Gea), 51180 (FOOT-LEVELING (5/16-18 THD) (4)), 51285 (Casing Back), 51445 (Snapper Chute Brake), 51274 (WASHER (2)), 51272 (Bowflex Leg Cable), 51230 (Fan 7), 51242 (Chain), 51219 (Snapper Drive Disc A), 51439 (Ground Clamp).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on WS400-1: 51674 (CONTROL PANEL (WS400-3)), 51256 (SELF-TAPPING SCREW (2) 6-32 X 7/8 PHIL. RD. HD TYPE B), 51530 (SUPPORT-BLOWER), 51143 (Hydro-Gear Fitting 5/16), 51470 (CONNECTOR-VERTICAL CONDUIT (INCLS. CODE 1 AND 18)), 51310 (Self-Tapping Screw).
Heat control (thermostats, fuses, heating element)
Symptom: Dishes don't dry at the end of the cycle, or a heated-dry setting doesn't seem to do anything.
Check: With the dishwasher unplugged, check continuity across the heating element or thermostat with a multimeter -- no continuity means it has failed.
Parts in this group on WS400-1: 51606 (BRACKET, OVAL THERMOSTAT), DC4700019A (Samsung Dryer Heating Element DC47-00019A).
Drive system (belts, pulleys, motors)
Symptom: A dish rack, spray arm, or wash-motor component isn't turning or sliding the way it should.
Check: Check that the part in question turns or slides freely by hand, and look for a cracked, worn, or seized point where it should pivot or roll.
Parts in this group on WS400-1: 51207 (ROLLER-UPPER RACK (4)), 51198 (Pulley).
Door and drum seals
Symptom: Water leaking out from around the door during or after a cycle.
Check: Check the door gasket for tears, flattening, or a section pulled loose from its channel, and confirm it seats evenly all the way around when the door is closed.
Parts in this group on WS400-1: 51165 (DOOR SEAL ASSEMBLY (INCL. CODE 25)).
Filtration and spray system
Symptom: Dishes come out with food residue, spots, or a cloudy film, or you notice leftover debris in the tub bottom after a cycle.
Check: Remove and rinse the filter assembly under the tub, and check that the spray arm spins freely and its jets aren't clogged -- these are the first things to check before assuming a pump has failed.
Parts in this group on WS400-1: 9911 (Kenmore Refrigerator Water Filter 9911 9911).
Before you buy
Match WS4001 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most dishwashers, the model and serial plate sits on the edge of the door or the tub rim. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring InSinkErator Dishwasher models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.