Parts for CED9150GW0 — Whirlpool Dryer

We found 17 parts confirmed to fit the Whirlpool Dryer CED9150GW0.

Compatibility table

All 17 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
W10153412Dryer Lint Screen Cover19 models
WPW10133242Coin Drop30 models$168.62
WPW10163915Door Seal30 models$62.60
WPW10350910Door Switch30 models$53.20
WPW10131172Dryer Drive Belt30 models$32.63
WPW10344193Pulley Idle30 models$47.40
WPW10247389Sensor30 models$64.69
WPW10135255Switch30 models$161.92
697770Dryer Blower Seal118 models
3392519Dryer Thermal Fuse461 models
W10521118Washer Seal587 models
W10512946Dryer Support Roller Tri-Ring Washer607 models
3394341Motor Pulley865 models
W10314171Dryer Drum Support Roller2,050 models
8577274Dryer Thermistor2,595 models
279457Heating Element Connection Wire Kit2,642 models$9.62–$10.42
690081Catch5,852 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Venting and airflow

Symptom: A dryer that needs multiple cycles to dry, runs unusually hot, or repeatedly trips its heat-limit switch.

Check: Clear the lint screen and the full vent run to the outside wall -- a restricted vent is the single most common cause of long dry times and repeat thermal-fuse failures.

Parts in this group on CED9150GW0: W10153412 (Dryer Lint Screen Cover).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on CED9150GW0: WPW10133242 (Coin Drop), WPW10247389 (Sensor), WPW10135255 (Switch), 697770 (Dryer Blower Seal), W10521118 (Washer Seal), 690081 (Catch).

Door and drum seals

Symptom: A drum seal that's worn through, letting the dryer pull in room air instead of pushing heated air through the load.

Check: Look for the drum seal fraying or missing where it meets the front or rear bulkhead -- worn felt or foam here is visible once the front panel is off.

Parts in this group on CED9150GW0: WPW10163915 (Door Seal).

Door, lid switches and latches

Symptom: The dryer won't run, or stops, unless the door is fully latched shut.

Check: Listen for an audible click when the door closes. No click, or a visibly cracked plastic tab on the latch, points to this part.

Parts in this group on CED9150GW0: WPW10350910 (Door Switch).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on CED9150GW0: WPW10131172 (Dryer Drive Belt), WPW10344193 (Pulley Idle), W10512946 (Dryer Support Roller Tri-Ring Washer), 3394341 (Motor Pulley), W10314171 (Dryer Drum Support Roller).

Heat control (thermostats, fuses, heating element)

Symptom: The dryer runs but produces no heat, or it shuts off partway through the cycle.

Check: With the dryer unplugged, check continuity across the part with a multimeter -- no continuity means it has failed. Clear the lint vent first, since a blocked vent is what usually trips a thermal fuse in the first place.

Parts in this group on CED9150GW0: 3392519 (Dryer Thermal Fuse), 8577274 (Dryer Thermistor), 279457 (Heating Element Connection Wire Kit).

Before you buy

Match CED9150GW0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Dryer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.