Parts for CED8990XW0 — Whirlpool Dryer

We found 22 parts confirmed to fit the Whirlpool Dryer CED8990XW0.

Compatibility table

All 22 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
WP3405160Blower Wheel Belt30 models$20.37
WPW10163915Door Seal30 models$62.60
WPW10131172Dryer Drive Belt30 models$32.63
W10850397HANDLE30 models$26.82
W11628813HINGE30 models$89.33
W11234001Motor Drive30 models$216.40
WPW10344192Pulley Idle30 models$68.86
W11247665SWITCH30 models$27.36
WPW10135255Switch30 models$161.92
WP233520Thrust Washer47 models$3.39
WP3391914Dryer High Limit Thermostat L29550f77 models$36.95–$81.84
WP3406653Dryer Moisture Sensor Wire Harness77 models$35.22–$80.82
W10166807Seal208 models
3392519Dryer Thermal Fuse461 models
3394341Motor Pulley865 models
690997Dryer Tri-Ring Retainer1,075 models
W10314171Dryer Drum Support Roller2,050 models
3388672Dryer Idler Pulley2,555 models
8577274Dryer Thermistor2,595 models
279457Heating Element Connection Wire Kit2,642 models$9.62–$10.42
80047Dryer Repair Kit2,939 models
690081Catch5,852 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on CED8990XW0: WP3405160 (Blower Wheel Belt), WPW10131172 (Dryer Drive Belt), W11234001 (Motor Drive), WPW10344192 (Pulley Idle), 3394341 (Motor Pulley), W10314171 (Dryer Drum Support Roller), 3388672 (Dryer Idler Pulley).

Door and drum seals

Symptom: A drum seal that's worn through, letting the dryer pull in room air instead of pushing heated air through the load.

Check: Look for the drum seal fraying or missing where it meets the front or rear bulkhead -- worn felt or foam here is visible once the front panel is off.

Parts in this group on CED8990XW0: WPW10163915 (Door Seal).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on CED8990XW0: W10850397 (HANDLE), W11628813 (HINGE).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on CED8990XW0: W11247665 (SWITCH), WPW10135255 (Switch), WP233520 (Thrust Washer), W10166807 (Seal), 690997 (Dryer Tri-Ring Retainer), 80047 (Dryer Repair Kit), 690081 (Catch).

Heat control (thermostats, fuses, heating element)

Symptom: The dryer runs but produces no heat, or it shuts off partway through the cycle.

Check: With the dryer unplugged, check continuity across the part with a multimeter -- no continuity means it has failed. Clear the lint vent first, since a blocked vent is what usually trips a thermal fuse in the first place.

Parts in this group on CED8990XW0: WP3391914 (Dryer High Limit Thermostat L29550f), 3392519 (Dryer Thermal Fuse), 8577274 (Dryer Thermistor), 279457 (Heating Element Connection Wire Kit).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the dryer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on CED8990XW0: WP3406653 (Dryer Moisture Sensor Wire Harness).

Before you buy

Match CED8990XW0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Dryer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.