Water Inlet Valve W11210459

About this part

W11210459 is a Whirlpool replacement part (water inlet valve) for washers. Our fitment data lists 82 models that use it.

Key facts

• Two-coil fill valve: the red solenoid opens the hot inlet, the blue solenoid opens the cold inlet, and both feed one outlet housing.
• Supplied as a complete assembly with the wiring harness attached, including the center lead for the water-temperature sensor (thermistor).
• Current Whirlpool number for this valve. It supersedes W10701459, W10838319, W10869799, W11025984 and W11038711, so an old valve printed with one of those numbers is the same part.
• Used on top-load washers sold as Whirlpool, Maytag, Amana, Roper, Inglis, Crosley and Kenmore.
• A realistic DIY job: 15 of 18 detailed repair reports rate it easy or very easy, and none took longer than an hour.
• The two inlet filter screens are built into the valve and are not sold separately.

The Washer Water Inlet Valve (part number W11210459) is an essential component that regulates water intake during wash cycles. This part directly replaces part numbers W11025984 and W11038711, ensuring compatibility with a variety of Whirlpool washer models. When installing the water inlet valve, it is crucial to first unplug the washer and shut off the water supply to prevent any water leakage or electrical hazards. Wearing work gloves is recommended to protect your hands during the installation process. For optimal performance, inspect the valve for any obstructions or damage that may affect water flow into the washer. This component can resolve issues related to improper filling, such as overfilling or incomplete filling of the washing drum.

Specifications

Symptoms this part fixes

• No water
• Slow fill
• Won't fill

Linked symptoms open the full troubleshooting guide.

Problems buyers fixed with this part

• Cold side not filling while hot still works
• No hot water in the wash cycle
• Valve dripping into the tub with the washer switched off
• Inlet body cracked after freezing
• High-pitched noise while filling, caused by limed-up inlet screens
• Washer stuck on "sensing" and never filling

Models that use this part

Cross-reference numbers

Earlier part numbers it replaces

The manufacturer lists W11210459 as the replacement for these earlier part numbers. Substitute parts can look different from the original but serve the same function.

• W11025984 — Water Inlet Valve Assembly
• W11038711
• W10701459 — Washer Water Inlet Valve
• W10838319
• W10869799 — Water Inlet Valve Assembly
• W11210459VP

Retailer stock numbers for the same part

Parts retailers list this same part under their own stock numbers. Use them to recognize the part on another site, not to order a different one.

• AP6329217 AppliancePartsPros
• PS12349267 PartSelect
• AWP43369 PartsDr
• PD00042885 PartsDr
• 4591321 RepairClinic
• EAP12349267

Numbers printed on the part

Production numbers are stamped or printed on the part itself and can differ from the number you order by.

• 33190189
• 33190190
• W10423122
• W10423124

Installation

What DIY repairers report

Based on 18 repair reports that state difficulty, time or tools, out of 99 reports filed on the source catalogs.

How to replace it

1. Unplug the washer and close both water supply valves.
2. Unscrew the hot and cold fill hoses at the back of the washer. Keep a towel or a small bucket ready for the water left in the hoses.
3. Remove the screws on the back of the control console (1/4 in. hex head on most of these washers).
4. Slide a putty knife under the front corners of the console to release the spring clips, then fold the console forward onto the lid.
5. Unplug the connector on each solenoid coil and the center thermistor connector. A phone photo first makes reassembly easier.
6. Remove the two screws that hold the valve housing and work the assembly out of its slot.
7. Seat the new valve, refit the two screws and reconnect all three connectors.
8. Hook the console's rear tabs back in, snap the front down and refit the screws. Reconnect the hoses, open the water, plug the washer in and run a short fill to check for leaks.

General procedure compiled from repair reports. Your model may differ, so follow the video or the service manual for your washer.

Tips from people who did this repair

• Check the inlet screens before you order. Several repairers found them blocked with lime or debris, and one found a second screen hidden behind the first. If the fill is still weak after cleaning, replace the valve.
• No putty knife? The console also comes free if you remove the screws on its left and right sides and lift the tabs under them with a flat screwdriver.
• The valve does not always slide straight out. Look for the two small screws at the top of the housing before pulling on it.
• If water keeps flowing with the washer unplugged, the valve is stuck open and must be replaced. If it stops when you unplug the washer, the water-level pressure switch or the control may be at fault instead.

A technician's video showing how to replace part W11210459. Plays from YouTube when you click.

Buyer ratings

Average 4.8 out of 5 from 188 buyer ratings across 4 parts catalogs.

Before you order

• Match the part number character for character, including dashes and trailing letters; a single different character is usually a different part.
• Confirm your appliance's model number on its data plate and check that it appears in the list above (or use the model lookup tool).
• If a seller offers a substitute number, check that it appears in this page's replacement list or in the manufacturer's documentation.

Model lookup tool

Frequently asked questions

Often bought with it

• Hose Washer Kit 285452A

Other parts for model RTW4516FW0

If you are repairing that appliance, these are the parts buyers replace most often on the same model.

• Agitator Directional Cogs 80040
• Agitator Repair Kit 285811
• Washer Drive Pulley W10721967
• Suspension Rod Kit W10780045
• Washer Water Pump WPW10661045
• Shift Actuator - 6 Pin W10913953
• Drive Block - 2 5/16 Inch High WP389140
• Washer Agitator Cap Barrier w/Seal WPW10074580