Parts for ZBD4100S00BK — GE Dishwasher

We found 45 parts confirmed to fit the GE Dishwasher ZBD4100S00BK.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on ZBD4100S00BK: WD37X51 (Holder), WD37X16 (Base Plate), WD37X38 (Indicator Lever), WD37X35 (Lens), WD37X36 (Lens), WD37X26 (Metal Lev), WD37X20 (Release Rod), WD37X151 (Silverware Basket), WD37X163 (Strip Rh), WD37X55 (Angle Lh), WD37X96 (Connect U), WD37X57 (Guide), WD37X80 (Hood), WD37X94 (Hose), WD37X39 (Indicator Lever), 313519 (Installation Instructions), WD37X52 (Mounting), WD37X116 (O-Ring), WD37X136 (Plug Board), WD37X107 (Seal), WD37X29 (Seal), WD37X18 (Slide), WD37X19 (Switch), 495551 (Zbd4100s 43), W10864519 (Refrigerator Ice Box Adapter and Fan Motor Kit), 317593GS (Briggs & Stratton Pressure Washer Pump), 14940ERED (Tool Chest Lock Bar), DC3100076A (Washer Motor Rotor Position Sensor), 545115301 (Leaf Blower Engine Cylinder), M10030A26 (Tool Chest Lock Set), 00744882 (Dishwasher Fill Funnel Assembly).

Filtration and spray system

Symptom: Dishes come out with food residue, spots, or a cloudy film, or you notice leftover debris in the tub bottom after a cycle.

Check: Remove and rinse the filter assembly under the tub, and check that the spray arm spins freely and its jets aren't clogged -- these are the first things to check before assuming a pump has failed.

Parts in this group on ZBD4100S00BK: WD37X103 (Fine Filter), WD37X148 (Spray Arm), WD37X98 (Spray Arm).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on ZBD4100S00BK: WD37X72 (Cover), WD37X141 (Cup Shelf), WD37X37 (Spring), 1313280 (Bracket), WB07X11306 (GE Microwave Control Panel).

Heat control (thermostats, fuses, heating element)

Symptom: Dishes don't dry at the end of the cycle, or a heated-dry setting doesn't seem to do anything.

Check: With the dishwasher unplugged, check continuity across the heating element or thermostat with a multimeter -- no continuity means it has failed.

Parts in this group on ZBD4100S00BK: WD37X82 (Thermostat).

Controls, timers and wiring

Symptom: A cycle that stops partway through, an error code or blinking light, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on ZBD4100S00BK: DD8201139B (Dishwasher Electronic Control Board), 00747819 (Dishwasher Electronic Control Board), DA9200384L (Refrigerator Electronic Control Board), 316557106 (Range Oven Control Board).

Door, lid switches and latches

Symptom: The dishwasher won't start, or stops mid-cycle, unless the door is fully latched shut.

Check: Listen for an audible click when the door latches. No click, or a visibly worn or broken latch or strike, points to this part.

Parts in this group on ZBD4100S00BK: 297243800 (Crosley Freezer Door Switch).

Before you buy

Match ZBD4100S00BK exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dishwashers, the model and serial plate sits on the edge of the door or the tub rim. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring GE Dishwasher models

These model numbers sort next to this one in the catalog and are usually the same product family.

• ZBD4100S01BK — 31 parts
• ZBD4300S00 — 31 parts
• ZBD4300S00WH — 29 parts
• ZBD4300S01WH — 31 parts
• ZBD4800X — 20 parts
• ZBD3500ZZ2WW — 11 parts
• ZBD3500ZZ2BB — 11 parts
• ZBD3500ZZ1WW — 11 parts
• ZBD3500ZZ1BB — 11 parts
• ZBD3300V60WW — 12 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.