Parts for S173E — Haugh's

We found 17 parts confirmed to fit the Haugh's S173E.

Compatibility table

All 17 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
004X24MABriggs & Statton Screw-Mch.25-20 X0.50This model only$30.79 · Amazon
MAS62064002Vacuum Beater Bar Belt2 models$21.51 · Amazon
S41075Door5 models$80.88 · Amazon
S13144Drive Inlay Glide5 models$63.40 · Amazon
S37020Glass Clip5 models$5.54 · Amazon
S32059Brss Bdy Trm6 models$8.35 · Amazon
S16002Brick9 models$2.85 · Amazon
183659Flywheel Axle11 models$6.99 · Amazon
W10895723Refrigeration Appliance Lokring Connector, 5/16-in11 models$26.38 · Amazon
S11008Handle Control Spring12 models$2.29 · Amazon
S11005Hinge Pins12 models$2.29 · Amazon
S150115/8" Seal13 models$19.49 · Amazon
WPW10347739Hose14 models$207.19 · Amazon
WB07K10236Trim Post Lf15 models$16.11 · Amazon
WH12X10462Washer Start Capacitor53 models$39.63 · Amazon
DA6200914BKenmore Pro Refrigerator Water Inlet Valve115 models$132.94 · Amazon
T18914A3Companion Tool Cabinet Drawer Trim119 models$4.99 · Amazon

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on S-173 E: 004X24MA (Briggs & Statton Screw-Mch.25-20 X0.50), S37020 (Glass Clip), 183659 (Flywheel Axle), W10895723 (Refrigeration Appliance Lokring Connector, 5/16-in), S11008 (Handle Control Spring), S11005 (Hinge Pins), WB07K10236 (Trim Post Lf), T18914A3 (Companion Tool Cabinet Drawer Trim).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on S-173 E: MAS62064002 (Vacuum Beater Bar Belt).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on S-173 E: S41075 (Door), S13144 (Drive Inlay Glide), S32059 (Brss Bdy Trm), S16002 (Brick), S15011 (5/8" Seal), WPW10347739 (Hose).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on S-173 E: WH12X10462 (Washer Start Capacitor).

Water inlet and drainage

Symptom: The unit isn't getting water when it should, or isn't draining or pumping it out when it should.

Check: Check the valve or pump for a clog or jammed object, and confirm the hose isn't kinked, restricted, or routed higher than the unit allows.

Parts in this group on S-173 E: DA6200914B (Kenmore Pro Refrigerator Water Inlet Valve).

Before you buy

Match S173E exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.