Parts for RTS21 — Ryobi

We found 40 parts confirmed to fit the Ryobi RTS21.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on RTS21: 089037011903 (Scale Label), 089037011038 (Front Block Slider, Left), 089037011045 (Linkage), 089037011707 (Power Cord Assembly), 089037011021 (Dado Throat Plate), 089037011023 (E-ring), 089037011006 (Scale Indicator), 089037011710 (Throat Plate W/ Wear Strip), 089037011004 (Magnet), 0121010211 (Table Locking Lever), 0131020211 (Wing Nut), 0121010213 (Leg End Plug), 411062701 (Cheese Head Nut 1/4 - 20), 411071003 (Nut Nylon; M5), 0101010313 (Wrench), 089037007050 (Brush Holder), 412012041 (Washer M6.5 X 13 X 1.5t), 089037007029 (C-ring), 412011712 (Flat Washer D 1/4 X D13 X 1.5), 089037007034 (Hex Nut (3/8-16)), 0121010209 (Rear Fence Slider), 0121010210 (Ring Pad), 089037007033 (Block), 0101010312 (Arbor Wrench (15/16-inch)), 411072702 (Lock Nut), 080015001475 (Nylon Washer), 089110109712 (Switch Assembly).

Door and drum seals

Symptom: A door or drum seal that has lost its grip, letting water or conditioned air escape past it.

Check: Inspect the seal for tears, flattening, or gaps, and check it against your model's part number before ordering.

Parts in this group on RTS21: 089037011711 (Knob And Gasket Assembly).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on RTS21: 089037011043 (Screw, M8 X 35 Mm), 089037011024 (Shaft Elevating W/spring Pin), 410602002 (Screw M4 X 25mm Truss Hd.), 089037011027 (Screw, M5 X 25 Mm), 0131020212 (Bevel Handle), 089037007007 (Screw (m4, Pan Hd.)), 0101140904 (Spring), 410601004 (Screw M4 X 18mm P), 089037007709 (Riving Knife Handle Assembly), 410051001 (Hex Screw Truss Hd M6x15mm), 410551701 (Screw W/washer), 410601003 (Screw M4 X 10mm Truss Hd.).

Before you buy

Match RTS21 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.