Parts for PT925SN4SS — GE

We found 65 parts confirmed to fit the GE PT925SN4SS.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on PT925SN4SS: WB07T10697 (Handle Trim), WB56X25774 (GE Wall Oven Door Outer Panel (Stainless)), WB02T10582 (Bracket Relay), WB02T10435 (Cover), WB48T10056 (Guide Rack A), WB44T10089 (Range Drip Pan), WB02T10449 (Spring Sleeve), WB02T10446 (Touch Cover), WB02T10440 (Cover Relay), WB10X30496 (DOOR HINGE R), WB10T10121 (Oven Door Hinge, Left), WB48T10055 (Range Oven Rack), WB07T10647 (Trim), WB10X30497 (DOOR HINGE L), WB07T10650 (Top Cabinet Trim), WB07T10644 (Trim), WB07T10645 (Trim), WB15T10192 (Wall Oven Door Handle (Stainless)), WB10T10100 (Hinge Receiver), WB10T10101 (Hinge Receiver), WB10K10030 (Hinge Assembly).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on PT925SN4SS: WB57T10343 (Outer Door Assembly), WB07T10646 (Brace Cavity), WB63T10138 (Frame), WB35T10205 (Insulation), WB63T10140 (Oven Wrapper), WB02T10437 (Plate Back B), WB02T10439 (Plate Back C), WB02T10451 (Plate Back L), WB44T10090 (Range Bake Element), WB18T10426 (Relay Brd/se), WB02T10424 (Retainer Insert), WB02T10431 (Retainer Insert), WB02T10432 (Retainer Insert), WB18T10422 (Touch Glass), WB02T10443 (Air Divider), WB18T10421 (Door Harness), WB44T10093 (Element Conx), WB63T10137 (Frame), WB35T10206 (Insulation), WB35T10207 (Insulation), WB02T10447 (Oven Blower Plate), WB02T10438 (Plate Back B), WB02T10423 (Retainer Insert), WB02T10427 (Retainer Insert), WB02T10430 (Retainer Insert), WB63T10143 (Slider Asm B), WB56X27914 (Window Pack Assembly), WB56T10285 (Pack Window), WB02T10442 (Retainer Insert), WB26X31059 (Wall Oven Cooling Fan Assembly), WB44T10092 (Wall Oven Bake Element), WB24T10161 (High-Limit Switch).

Door and drum seals

Symptom: A door or drum seal that has lost its grip, letting water or conditioned air escape past it.

Check: Inspect the seal for tears, flattening, or gaps, and check it against your model's part number before ordering.

Parts in this group on PT925SN4SS: WB35X27918 (Oven Door Gasket).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on PT925SN4SS: WB27T11067 (Wall Oven Display Control Board), WB18T10420 (Wall Oven LED Wire Harness), WB27T11068 (Wall Oven Relay Control Board), WB27T11069 (Wall Oven Upper Oven Relay Control Board), WB27T10662 (Range Convection Fan Motor Start Capacitor).

Door, lid switches and latches

Symptom: The appliance won't start, or stops, unless the lid or door is fully latched shut.

Check: Listen for an audible click when the lid or door closes. No click, or a visibly cracked plastic tab on the latch, points to this part.

Parts in this group on PT925SN4SS: WB14T10067 (Wall Oven Door Latch Assembly).

Before you buy

Match PT925SN4SS exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.