Parts for MAT10PDAAW — Whirlpool Washer
We found 7 parts confirmed to fit the Whirlpool Washer MAT10PDAAW.
Same parts list as MAT10PDAAL (Whirlpool Washer). MAT10PDAAW shares an identical confirmed parts list with MAT10PDAAL (Whirlpool Washer). That page is the canonical version of this parts list — use it if you want the primary reference, or stay here since the list below is exactly the same for MAT10PDAAW.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| 214610 | BUMPER- LI | 30 models | $9.16 |
| 22001954 | Injector Hose with Clamp | 30 models | $45.29 |
| WPW10133264 | Lock Assembly | 30 models | $78.77 |
| WPW10447152 | SWITCH-VLT | 30 models | $34.74 |
| WP208543 | Washer Agitator | 30 models | $147.60 |
| WP22001604 | Washer Water Valve | 30 models | $178.18 |
| WP22001308 | Water Level Pressure Switch | 30 models | $140.06 |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on MAT10PDAAW: 214610 (BUMPER- LI), 22001954 (Injector Hose with Clamp), WPW10133264 (Lock Assembly), WPW10447152 (SWITCH-VLT), WP22001604 (Washer Water Valve).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on MAT10PDAAW: WP208543 (Washer Agitator).
Controls, timers and wiring
Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on MAT10PDAAW: WP22001308 (Water Level Pressure Switch).
Before you buy
Match MAT10PDAAW exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.