Parts for LATH100AAM — Whirlpool Washer
We found 8 parts confirmed to fit the Whirlpool Washer LATH100AAM.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WP21352320 | Drive Belt - 51 inches long | 77 models | $8.13–$16.07 |
| WP22004469 | Rear Leveling Leg and Foot with Pad | 77 models | $11.49–$22.52 |
| 430057 | Washer Lid Switch Actuator | 315 models | — |
| 352057 | Impeller | 380 models | — |
| 352044 | Washer Lid Hinge | 434 models | — |
| 257080 | Discharge Clamp | 440 models | — |
| 256068 | Hose Clamp | 472 models | — |
| 337891 | Inlet Hose | 539 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on LATH100AAM: WP21352320 (Drive Belt - 51 inches long).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on LATH100AAM: WP22004469 (Rear Leveling Leg and Foot with Pad).
Door, lid switches and latches
Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.
Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.
Parts in this group on LATH100AAM: 430057 (Washer Lid Switch Actuator), 352044 (Washer Lid Hinge).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on LATH100AAM: 352057 (Impeller), 257080 (Discharge Clamp), 256068 (Hose Clamp), 337891 (Inlet Hose).
Before you buy
Match LATH100AAM exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.