Parts for LAT8405AAE — Whirlpool Washer

We found 11 parts confirmed to fit the Whirlpool Washer LAT8405AAE.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Controls, timers and wiring

Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on LAT8405AAE: WP22001026 (Washer Timer 60hz).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on LAT8405AAE: 22001006 (CUP- BLEAC), WP3367052 (Hose Clamp), 201011 (Hose Clamp), 202860 (Inlet Hose Kit), 216169 (Clamp,hose-i), 058700 (Silastic,adh).

Interior lighting

Symptom: The interior light doesn't turn on when the door opens.

Check: Confirm power is reaching the socket, then check the door-activated light switch before assuming the bulb itself is at fault.

Parts in this group on LAT8405AAE: WP903115 (Lock Indicator Light).

Water inlet and drainage

Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.

Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.

Parts in this group on LAT8405AAE: 22001274 (Washer Water Inlet Valve).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on LAT8405AAE: 211125 (Washer Drive Belt), 211124 (Washer Pump Drive Belt).

Before you buy

Match LAT8405AAE exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

• LAT8405AAM — 8 parts
• LAT8406AAE — 11 parts
• LAT8406AAM — 10 parts
• LAT8414AAE — 8 parts
• LAT8414AAL — 8 parts
• LAT8404ABE — 9 parts
• LAT8404AAM — 8 parts
• LAT8404AAL — 8 parts
• LAT8404AAE — 8 parts
• LAT8306ABE — 11 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.