Parts for JDB3200AWB3 — Whirlpool Dishwasher

We found 18 parts confirmed to fit the Whirlpool Dishwasher JDB3200AWB3.

Compatibility table

All 18 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
W10195048Dishwasher Water Inlet Valve24 models
W10234638Dishwasher Spray Arm29 models
W10315891DISHRACK30 models$293.45
WPW10238413Dispenser30 models$137.47
WPW10261336Lower Dishrack Roller Assembly30 models$47.14
WPW10238412Pivot30 models$20.37
WPW10238411Retainer30 models$9.62
WPW10056351Tine Row30 models$54.24
W10194864Upper Dishrack30 models$207.09
W10234631Filter35 models
8269259Dishwasher Vent Gasket189 models
W10158351Dishwasher Drain Pump393 models
W10082860Stop509 models
W10137608Dishwasher Drain Hose1,324 models
661663Fuse2,067 models
661566Dishwasher Thermostat3,785 models
4396277BARRIER4,961 models$22.17–$27.36
8269144Dishwasher Drain Hose5,275 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Water inlet and drainage

Symptom: The dishwasher won't fill, or dishes come out with standing water still in the tub bottom after the cycle ends.

Check: Check the inlet valve's screen filter for sediment, and check the drain pump and drain hose for a clog or a jammed object -- a piece of broken glass or a bottle cap is a common culprit.

Parts in this group on JDB3200AWB3: W10195048 (Dishwasher Water Inlet Valve), W10158351 (Dishwasher Drain Pump), W10137608 (Dishwasher Drain Hose), 8269144 (Dishwasher Drain Hose).

Filtration and spray system

Symptom: Dishes come out with food residue, spots, or a cloudy film, or you notice leftover debris in the tub bottom after a cycle.

Check: Remove and rinse the filter assembly under the tub, and check that the spray arm spins freely and its jets aren't clogged -- these are the first things to check before assuming a pump has failed.

Parts in this group on JDB3200AWB3: W10234638 (Dishwasher Spray Arm), W10234631 (Filter).

Dishrack hardware (rollers, wheels and tines)

Symptom: A dish rack that binds, drags, or comes off its rail track when you pull it in or out, or a rack with a cracked, loose, or missing wheel or tine.

Check: Pull the rack fully out and check each wheel or roller for a crack or a missing axle pin, and check that tines aren't snapped off or pushed out of alignment along the row.

Parts in this group on JDB3200AWB3: W10315891 (DISHRACK), WPW10261336 (Lower Dishrack Roller Assembly), WPW10056351 (Tine Row), W10194864 (Upper Dishrack).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on JDB3200AWB3: WPW10238413 (Dispenser), WPW10238412 (Pivot), WPW10238411 (Retainer), W10082860 (Stop), 661663 (Fuse), 4396277 (BARRIER).

Door and drum seals

Symptom: Water leaking out from around the door during or after a cycle.

Check: Check the door gasket for tears, flattening, or a section pulled loose from its channel, and confirm it seats evenly all the way around when the door is closed.

Parts in this group on JDB3200AWB3: 8269259 (Dishwasher Vent Gasket).

Heat control (thermostats, fuses, heating element)

Symptom: Dishes don't dry at the end of the cycle, or a heated-dry setting doesn't seem to do anything.

Check: With the dishwasher unplugged, check continuity across the heating element or thermostat with a multimeter -- no continuity means it has failed.

Parts in this group on JDB3200AWB3: 661566 (Dishwasher Thermostat).

Before you buy

Match JDB3200AWB3 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dishwashers, the model and serial plate sits on the edge of the door or the tub rim. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Dishwasher models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.