Parts for JBS02C1WH — GE Range

We found 8 parts confirmed to fit the GE Range JBS02C1WH.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on JBS02C1WH: WB17X5123 (Terminal Block).

Heat control (thermostats, fuses, heating element)

Symptom: The appliance runs but heats or cools inconsistently, or shuts off partway through a cycle.

Check: With the appliance unplugged, check continuity across the part with a multimeter -- no continuity means it has failed.

Parts in this group on JBS02C1WH: WB20K10004 (G.E. Range Oven Control Thermostat).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on JBS02C1WH: WB2X8228 (Range Surface Element Receptacle), WB24T10022 (Range Surface Element Control Switch, 1,250-watt), WB44K10005 (Range Bake Element WB44K10005), WB24T10027 (Range Surface Element Control Switch).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on JBS02C1WH: WB10K12 (Range Oven Door Hinge Roller).

Interior lighting

Symptom: The interior light doesn't turn on when the door opens.

Check: Confirm power is reaching the socket, then check the door-activated light switch before assuming the bulb itself is at fault.

Parts in this group on JBS02C1WH: WB25K10002 (Range Indicator Light).

Before you buy

Match JBS02C1WH exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most ranges, the model and serial plate sits behind the storage drawer or on the door frame. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring GE Range models

These model numbers sort next to this one in the catalog and are usually the same product family.

• JBS02*J2 — 8 parts
• JBS02LY2WH — 8 parts
• JBS02*N2 — 8 parts
• JBS02*P1 — 8 parts
• JBS034S1 — 9 parts
• JBS02BB1 — 8 parts
• JBP99TH2WW — 7 parts
• JBP99TH1WW — 6 parts
• JBP99SH3SS — 7 parts
• JBP99SH2SS — 7 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.