Parts for HSW08 — Haier Refrigerator

We found 12 parts confirmed to fit the Haier Refrigerator HSW08.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on HSW08: 5506001040 (Diaphragm), FUSIONGSII9 (Bladez Seat Slider), 305338306 (Kenmore Pro Washer), W10672575 (Refrigerator Pad), 591005157 (Kenmore Vacuum Hose Assembly), WPW10482482 (Dishwasher Pump and Motor Assembly), 318254902 (Frigidaire Range Bake Element).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on HSW08: 5304491558 (Microwave Stirrer Fan Cover), W10156264 (Range Surface Burner Knob), WR71X29944 (BOTTLE SHELF).

Water inlet and drainage

Symptom: The icemaker or dispenser isn't getting water, or a supply-line fitting is leaking.

Check: Check that the water inlet valve is receiving supply pressure and that its screen filter isn't clogged, and inspect the fill tube and fittings for a leak or freeze-up.

Parts in this group on HSW08: 4681EA1007A (Kenmore Elite Washer Drain Pump).

Ice maker and dispenser system

Symptom: No ice production, a jammed dispenser chute, or water leaking into the ice bin.

Check: Confirm water is actually reaching the icemaker (check the inlet valve and fill tube for a freeze-up), and check that the auger or dispenser motor turns freely without binding.

Parts in this group on HSW08: 5304493024 (Refrigerator Dispenser Lever and Ice Chute Funnel Assembly (Black)).

Before you buy

Match HSW08 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most refrigerators, the model and serial plate sits inside on a side wall or behind the bottom grille. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Haier Refrigerator models

These model numbers sort next to this one in the catalog and are usually the same product family.

• HT21TS52SB — 11 parts
• MHR5WSPRH — 10 parts
• QJS15HYRBFS — 14 parts
• QJS15HYRCFS — 15 parts
• RRTS18QIAB — 11 parts
• HSE12WNAWW — 18 parts
• HSE10WNAWW — 18 parts
• HRT21R2APE — 13 parts
• HRT21F1APS — 18 parts
• HRT18RCWW0 — 55 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.