Parts for HP5950T — Maytag

We found 14 parts confirmed to fit the Maytag HP5950T.

Compatibility table

All 14 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
66001095MANUAL, USE & CARE - Series 923 models— · Amazon
9000516BAFFLE, FLUE - Series 1031 models$31.97 · Amazon
0230224ORIFICE, BURNER (#51) - Series 1234 models$60.18 · Amazon
316576302Frigidaire Wall Oven Control Board36 models$330.24 · Amazon
ACQ73322901Range Oven Door Outer Panel36 models$204.80 · Amazon
0230225ORIFICE, BURNER (#50) - Series 1243 models$36.53 · Amazon
126847XWizard Lawn Tractor Drag Link Bushing50 models$10.49 · Amazon
66001080VALVE, DRAIN-5/8" SHANK - Series 1059 models$16.05 · Amazon
66001079VALVE, RELIEF-5/8"SHANK - Series 1081 models$36.44 · Amazon
66001030Dip Tube93 models$60.99 · Amazon
66001032Draft Hood98 models$19.99 · Amazon
95405040Lawn Mower Belt103 models$53.20 · Amazon
66001013TANK, EXPANSION (2 GAL.) - Series 10166 models— · Amazon
00642239Dishwasher Drain Pump649 models$127.95 · Amazon

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on HP5950T: 66001095 (MANUAL, USE & CARE - Series 9), 9000516 (BAFFLE, FLUE - Series 10), 0230224 (ORIFICE, BURNER (#51) - Series 12), 0230225 (ORIFICE, BURNER (#50) - Series 12), 126847X (Wizard Lawn Tractor Drag Link Bushing), 66001080 (VALVE, DRAIN-5/8" SHANK - Series 10), 66001079 (VALVE, RELIEF-5/8"SHANK - Series 10), 66001032 (Draft Hood).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on HP5950T: 316576302 (Frigidaire Wall Oven Control Board).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on HP5950T: ACQ73322901 (Range Oven Door Outer Panel), 66001030 (Dip Tube), 66001013 (TANK, EXPANSION (2 GAL.) - Series 10).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on HP5950T: 95405040 (Lawn Mower Belt).

Water inlet and drainage

Symptom: The unit isn't getting water when it should, or isn't draining or pumping it out when it should.

Check: Check the valve or pump for a clog or jammed object, and confirm the hose isn't kinked, restricted, or routed higher than the unit allows.

Parts in this group on HP5950T: 00642239 (Dishwasher Drain Pump).

Before you buy

Match HP5950T exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.