Parts for GSD2920T60BB — GE Dishwasher

We found 11 parts confirmed to fit the GE Dishwasher GSD2920T60BB.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on GSD2920T60BB: 495616 (Gsd2910t 292), WD8X228 (Dishwasher Tub Corner Baffle, Left WD8X228), WD8X227 (Dishwasher Tub Corner Baffle, Right WD8X227), WD8X181 (Dishwasher Gate Shaft Seal WD8X181).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on GSD2920T60BB: WD28X308 (Lower Rack), WD28X312 (Lower Rack), WD12X344 (Cap).

Filtration and spray system

Symptom: Dishes come out with food residue, spots, or a cloudy film, or you notice leftover debris in the tub bottom after a cycle.

Check: Remove and rinse the filter assembly under the tub, and check that the spray arm spins freely and its jets aren't clogged -- these are the first things to check before assuming a pump has failed.

Parts in this group on GSD2920T60BB: WD22X139 (Spray Arm), WD18X214 (Dishwasher Lower Spray Arm Pivot Shaft).

Dishrack hardware (rollers, wheels and tines)

Symptom: A dish rack that binds, drags, or comes off its rail track when you pull it in or out, or a rack with a cracked, loose, or missing wheel or tine.

Check: Pull the rack fully out and check each wheel or roller for a crack or a missing axle pin, and check that tines aren't snapped off or pushed out of alignment along the row.

Parts in this group on GSD2920T60BB: WD12X426 (Rack Roller), WD12X427 (Rack Roller).

Before you buy

Match GSD2920T60BB exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dishwashers, the model and serial plate sits on the edge of the door or the tub rim. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring GE Dishwasher models

These model numbers sort next to this one in the catalog and are usually the same product family.

• GSD2920T64BB — 11 parts
• GSD2930S40WA — 10 parts
• GSD2930S45WA — 15 parts
• GSD2930S48WA — 11 parts
• GSD2930T55WW — 11 parts
• GSD2920T55BB — 11 parts
• GSD2920S48BA — 11 parts
• GSD2920S45BA — 11 parts
• GSD2910T64AA — 12 parts
• GSD2910T60AA — 11 parts

Other models with this exact parts list

Each model below is confirmed to share the identical compatible-parts list with this one.

• GSD2930T60WW — 12 parts
• GSD2930T64WW — 11 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.