Parts for GFD49GRPK0DG — GE Dryer
We found 13 parts confirmed to fit the GE Dryer GFD49GRPK0DG.
Same parts list as GFD48GSPK0DG (GE Dryer). GFD49GRPK0DG shares an identical confirmed parts list with GFD48GSPK0DG (GE Dryer). That page is the canonical version of this parts list — use it if you want the primary reference, or stay here since the list below is exactly the same for GFD49GRPK0DG.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WH44X21159 | Dryer Door Outer Panel | 30 models | $79.80 |
| WE18X20428 | Lint Filter | 30 models | $108.85 |
| WE01X22114 | ROD SENSOR | 30 models | $13.92 |
| WE04X10189 | Sensor Radie | 30 models | — |
| WE02X20373 | Scr 818 Ab Pnt15 1/2 S | 36 models | $15.00 |
| WE04X10187 | Dryer High-Limit Thermostat | 40 models | — |
| WE04X20252 | Thermistor Ice Control | 57 models | — |
| WE04X10183 | Dryer Burner Igniter | 58 models | — |
| WE12X10020 | Dryer Drum Belt | 59 models | — |
| WE12X10018 | Dryer Idler Assembly, Left | 59 models | — |
| WE12X10019 | Idler Asm (r | 59 models | — |
| WE04X10179 | O Thermistor | 59 models | — |
| WE04X10190 | Dryer Outlet Backup Thermostat | 131 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on GFD49GRPK0DG: WH44X21159 (Dryer Door Outer Panel).
Venting and airflow
Symptom: A dryer that needs multiple cycles to dry, runs unusually hot, or repeatedly trips its heat-limit switch.
Check: Clear the lint screen and the full vent run to the outside wall -- a restricted vent is the single most common cause of long dry times and repeat thermal-fuse failures.
Parts in this group on GFD49GRPK0DG: WE18X20428 (Lint Filter).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on GFD49GRPK0DG: WE01X22114 (ROD SENSOR), WE04X10189 (Sensor Radie), WE02X20373 (Scr 818 Ab Pnt15 1/2 S), WE04X10183 (Dryer Burner Igniter).
Heat control (thermostats, fuses, heating element)
Symptom: The dryer runs but produces no heat, or it shuts off partway through the cycle.
Check: With the dryer unplugged, check continuity across the part with a multimeter -- no continuity means it has failed. Clear the lint vent first, since a blocked vent is what usually trips a thermal fuse in the first place.
Parts in this group on GFD49GRPK0DG: WE04X10187 (Dryer High-Limit Thermostat), WE04X20252 (Thermistor Ice Control), WE04X10179 (O Thermistor), WE04X10190 (Dryer Outlet Backup Thermostat).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on GFD49GRPK0DG: WE12X10020 (Dryer Drum Belt), WE12X10018 (Dryer Idler Assembly, Left), WE12X10019 (Idler Asm (r).
Before you buy
Match GFD49GRPK0DG exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring GE Dryer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.