Parts for EWFLS70JSS0 — Frigidaire Washer
We found 11 parts confirmed to fit the Frigidaire Washer EWFLS70JSS0.
Same parts list as EIFLS60JIW0 (Frigidaire Washer). EWFLS70JSS0 shares an identical confirmed parts list with EIFLS60JIW0 (Frigidaire Washer). That page is the canonical version of this parts list — use it if you want the primary reference, or stay here since the list below is exactly the same for EWFLS70JSS0.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| 134640200 | Washer Drain Pump Filter | 17 models | — |
| 134618213 | Motor Control Board | 30 models | $227.42 |
| 134637810 | Washer Water Inlet Valve | 52 models | — |
| 134638900 | Washer Drive Motor | 60 models | — |
| 134616200 | Washer Door Boot Spring Clamp | 66 models | — |
| 134616700 | Washer Drive Belt | 73 models | — |
| 131303300 | Siphon Screw | 243 models | — |
| 134371300 | Washer Dispenser Inlet Gasket | 243 models | — |
| 134361900 | Washer Outer Tub Gasket | 279 models | — |
| 131302800 | Washer Baffle Screw | 421 models | — |
| 131268300 | Washer Shock Absorber Mounting Pin | 435 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on EWFLS70JSS0: 134640200 (Washer Drain Pump Filter), 134637810 (Washer Water Inlet Valve).
Controls, timers and wiring
Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on EWFLS70JSS0: 134618213 (Motor Control Board).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on EWFLS70JSS0: 134638900 (Washer Drive Motor), 134616700 (Washer Drive Belt).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on EWFLS70JSS0: 134616200 (Washer Door Boot Spring Clamp), 131303300 (Siphon Screw), 131302800 (Washer Baffle Screw).
Door and drum seals
Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.
Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.
Parts in this group on EWFLS70JSS0: 134371300 (Washer Dispenser Inlet Gasket), 134361900 (Washer Outer Tub Gasket).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on EWFLS70JSS0: 131268300 (Washer Shock Absorber Mounting Pin).
Before you buy
Match EWFLS70JSS0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Frigidaire Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Other models with this exact parts list
Each model below is confirmed to share the identical compatible-parts list with this one.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.