Parts for ESE9900 — Whirlpool Washer
We found 22 parts confirmed to fit the Whirlpool Washer ESE9900.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WP206413 | Washer Direct Current Water Inlet Valve | 28 models | $178.75 |
| W10411000 | Drive Motor | 30 models | $200.55 |
| WP306199 | Heater Relay | 30 models | $62.39 |
| WP206418 | Water Level Switch | 30 models | $139.97 |
| WP207538 | AGITATOR W | 47 models | $79.50 |
| WP62011900 | Brake Assembly | 47 models | $88.44 |
| WP215395 | PLATE- CLU | 47 models | $5.98 |
| 12001413 | Strainer & Washer Kit | 47 models | $4.22 |
| WP62114830 | WASHER- SP | 47 models | $6.34 |
| WP215581 | Agitator Shaft Spring | 76 models | $6.50–$9.62 |
| WP213013 | Injector Hose | 76 models | $17.81–$42.12 |
| WP211089 | LUG- STOP | 76 models | $7.98–$11.77 |
| WP213015 | Plastic Injector Nozzle | 76 models | $7.21–$9.62 |
| WP22003441 | Rear Bearing | 76 models | $7.82–$18.22 |
| WP216201 | Rubber Injector Valve | 76 models | $11.12–$20.37 |
| 314774 | Drum Belt | 90 models | — |
| 306106 | Holding Coil | 666 models | — |
| 306105 | Second Coil | 666 models | — |
| 303377 | Gas Sensor | 712 models | — |
| 303836 | Impeller | 760 models | — |
| 058700 | Silastic,adh | 859 models | — |
| 303373 | Roller W/bea | 1,103 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on ESE9900: WP206413 (Washer Direct Current Water Inlet Valve).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on ESE9900: W10411000 (Drive Motor), 314774 (Drum Belt), 303373 (Roller W/bea).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on ESE9900: WP306199 (Heater Relay), WP62011900 (Brake Assembly), WP215395 (PLATE- CLU), 12001413 (Strainer & Washer Kit), WP62114830 (WASHER- SP), WP213013 (Injector Hose), WP211089 (LUG- STOP), WP213015 (Plastic Injector Nozzle), WP22003441 (Rear Bearing), WP216201 (Rubber Injector Valve), 306106 (Holding Coil), 306105 (Second Coil), 303377 (Gas Sensor), 303836 (Impeller), 058700 (Silastic,adh).
Controls, timers and wiring
Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on ESE9900: WP206418 (Water Level Switch).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on ESE9900: WP207538 (AGITATOR W), WP215581 (Agitator Shaft Spring).
Before you buy
Match ESE9900 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.