Parts for EIED50LIW2 — Dryer

We found 9 parts confirmed to fit the Dryer EIED50LIW2.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Door and drum seals

Symptom: A drum seal that's worn through, letting the dryer pull in room air instead of pushing heated air through the load.

Check: Look for the drum seal fraying or missing where it meets the front or rear bulkhead -- worn felt or foam here is visible once the front panel is off.

Parts in this group on EIED50LIW2: 5304499489 (Dryer Drum Seal).

Heat control (thermostats, fuses, heating element)

Symptom: The dryer runs but produces no heat, or it shuts off partway through the cycle.

Check: With the dryer unplugged, check continuity across the part with a multimeter -- no continuity means it has failed. Clear the lint vent first, since a blocked vent is what usually trips a thermal fuse in the first place.

Parts in this group on EIED50LIW2: 134711300 (Kenmore Dryer Thermistor), 137114000 (Dryer Heating Element), 3204267 (Kelvinator Dryer High-Limit Thermostat 3204267).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on EIED50LIW2: 134693300 (Motor), 134711401 (Dryer Exhaust Thermal Limiter).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on EIED50LIW2: 134793500 (Dryer Idler Assembly), 134715900 (Dryer Drum Support Roller), 134719300 (White-Westinghouse Dryer Drum Belt).

Before you buy

Match EIED50LIW2 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Other dryer models

These model numbers sort close to this one in the catalog for the same appliance type. The brand is not confirmed to match, but the model number range is close.

• EIGD50LIW0 — 9 parts
• EIMED55IIW0 — 9 parts
• EIMED55IIW1 — 9 parts
• EIMED55IIW3 — 10 parts
• EIMED55IMB0 — 9 parts
• EIED50LIW1 — 9 parts
• EIED50LIW0 — 9 parts
• EIED200QSW00 — 6 parts
• EGD5600G8WW — 11 parts
• EGD5600G7WW — 11 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.