Parts for EI30GF55GSE — Electrolux Range
We found 49 parts confirmed to fit the Electrolux Range EI30GF55GSE.
Compatibility table
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on EI30GF55GSE: 7316438400 (Burner,seale), 7316540700 (Igniter Orifice), 7316558300 (Lf Burner), 7316489403 (Burner Igniter), 7316489404 (Oven Igniter), 316542410 (LP Conversion Kit), 316409200 (Shiled), 316404304 (Range Broil Burner), 316543202 (Cooktop Igniter Orifice), 7316490000 (Probe), 316537900 (Range Surface Burner Grate), 316543204 (Range Surface Burner Igniter and Orifice Holder), 316580700 (Receptacle), 316540700 (Range Surface Burner Igniter and Orifice Holder), 316527511 (Ikea Range Surface Burner Orifice), 08067973 (Range Oven Insulation), 316415000 (Range Warming Drawer Inner Slide Rail, Right), 316456700 (Range Warming Drawer Glide), 316404901 (Range Oven Gas Valve), 316415001 (Range Warming Drawer Inner Slide Rail, Left), 316438400 (Range Surface Burner Head), 316490000 (Frigidaire Range Oven Temperature Sensor 316490000).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on EI30GF55GSE: 7316438304 (Cap,5k Burne), 7316438504 (Cap-burner,1), 7316240600 (Screw,assy M), 316538417 (Range Control Panel), 316503705 (Range Oven Door Heat Shield), 7316498003 (Oven Rack), 316438704 (Surface Burner Cap (14K)), 316433303 (Kenmore Elite Range Oven Door Handle Screw), 316527704 (Range Surface Burner Cap 9,500-BTU (Black)), 316533801 (Range Oven Door Outer Panel Support Bracket), 316540900 (Range Screw), 5304508468 (Kenmore Pro Cooktop Burner Cap (Black)), 316438200 (Tappan Range Surface Burner Head), 5304507348 (Range Oven Gas Supply Tube), 5304508441 (Kenmore Pro Cooktop Burner Cap, 5,000-BTU (Black)), 316404100 (Range Convection Fan Motor Mounting Bracket), 316400144 (Panel,bodyside ,black ,RH), 316215600 (Range Screw), 316438600 (Tappan Range Surface Burner Head), 316489403 (Tappan Range Oven Burner Igniter 316489403), 316400603 (Frigidaire Range Oven Bottom Panel).
Interior lighting
Symptom: The interior light doesn't turn on when the door opens.
Check: Confirm power is reaching the socket, then check the door-activated light switch before assuming the bulb itself is at fault.
Parts in this group on EI30GF55GSE: 316510701 (Range Oven Light Assembly).
Controls, timers and wiring
Symptom: A cycle that doesn't advance, an unresponsive display, or the unit not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on EI30GF55GSE: 316576603 (Range Oven Control Board), 316443921 (Range Oven Control Board), 316535200 (Range Power Control Board).
Door, lid switches and latches
Symptom: The appliance won't start, or stops, unless the lid or door is fully latched shut.
Check: Listen for an audible click when the lid or door closes. No click, or a visibly cracked plastic tab on the latch, points to this part.
Parts in this group on EI30GF55GSE: 316405800 (Oven Door Latch Assembly), 316445500 (Universal/Multiflex (Frigidaire) Range Oven Door Switch).
Before you buy
Match EI30GF55GSE exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most ranges, the model and serial plate sits behind the storage drawer or on the door frame. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Electrolux Range models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.