Parts for CFSE5100QA0 — Frigidaire Dryer
We found 11 parts confirmed to fit the Frigidaire Dryer CFSE5100QA0.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| 809160802 | Electronic Control Board | 30 models | $234.00 |
| 5304499489 | Dryer Drum Seal | 94 models | — |
| 134792700 | Frigidaire Dryer Heating Element 134792700 | 111 models | $125.83 |
| 137544800 | Dryer Water Inlet Valve | 119 models | — |
| 134693300 | Motor | 174 models | — |
| 134711401 | Dryer Exhaust Thermal Limiter | 238 models | — |
| 134793500 | Dryer Idler Assembly | 366 models | — |
| 134715900 | Dryer Drum Support Roller | 377 models | — |
| 134719300 | White-Westinghouse Dryer Drum Belt | 441 models | — |
| 134587700 | Dryer Thermistor | 513 models | — |
| 3204267 | Kelvinator Dryer High-Limit Thermostat 3204267 | 1,040 models | $67.11 |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Controls, timers and wiring
Symptom: A cycle that doesn't advance, an unresponsive display, or the dryer not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on CFSE5100QA0: 809160802 (Electronic Control Board).
Door and drum seals
Symptom: A drum seal that's worn through, letting the dryer pull in room air instead of pushing heated air through the load.
Check: Look for the drum seal fraying or missing where it meets the front or rear bulkhead -- worn felt or foam here is visible once the front panel is off.
Parts in this group on CFSE5100QA0: 5304499489 (Dryer Drum Seal).
Heat control (thermostats, fuses, heating element)
Symptom: The dryer runs but produces no heat, or it shuts off partway through the cycle.
Check: With the dryer unplugged, check continuity across the part with a multimeter -- no continuity means it has failed. Clear the lint vent first, since a blocked vent is what usually trips a thermal fuse in the first place.
Parts in this group on CFSE5100QA0: 134792700 (Frigidaire Dryer Heating Element 134792700), 134587700 (Dryer Thermistor), 3204267 (Kelvinator Dryer High-Limit Thermostat 3204267).
Water inlet and drainage
Symptom: The unit isn't getting water when it should, or isn't draining or pumping it out when it should.
Check: Check the valve or pump for a clog or jammed object, and confirm the hose isn't kinked, restricted, or routed higher than the unit allows.
Parts in this group on CFSE5100QA0: 137544800 (Dryer Water Inlet Valve).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on CFSE5100QA0: 134693300 (Motor), 134711401 (Dryer Exhaust Thermal Limiter).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on CFSE5100QA0: 134793500 (Dryer Idler Assembly), 134715900 (Dryer Drum Support Roller), 134719300 (White-Westinghouse Dryer Drum Belt).
Before you buy
Match CFSE5100QA0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Frigidaire Dryer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.