Parts for C5037 — Hoover

We found 11 parts confirmed to fit the Hoover C5037.

Compatibility table

All 11 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
48437023PAD HOLDER ASSEMBLY2 models— · Amazon
38528023Floor Scrubber Belt3 models$14.99 · Amazon
21347002CURVED SPRING WASHER (Qty 2)6 models— · Amazon
34252011Release Bar6 models$45.49 · Amazon
21447207SELF-TAPPING SCREW (Qty 4)6 models— · Amazon
43247024Wheel6 models— · Amazon
31721042SPACER - .250 - CCS (Qty 2)8 models— · Amazon
21312799Washer11 models$2.16 · Amazon
27478611Cable Wedg14 models$3.49 · Amazon
018972Terminal I15 models$2.16 · Amazon
21854103Nut24 models$2.16 · Amazon

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on C5037: 48437023 (PAD HOLDER ASSEMBLY), 34252011 (Release Bar), 43247024 (Wheel), 21312799 (Washer), 27478611 (Cable Wedg), 018972 (Terminal I), 21854103 (Nut).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on C5037: 38528023 (Floor Scrubber Belt).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on C5037: 21347002 (CURVED SPRING WASHER (Qty 2)), 21447207 (SELF-TAPPING SCREW (Qty 4)), 31721042 (SPACER - .250 - CCS (Qty 2)).

Before you buy

Match C5037 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.