Parts for BT85RK4 — Magic Chef

We found 18 parts confirmed to fit the Magic Chef BT85RK4.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on BT85RK-4: DA6402962D (HANDLE-SID), 251098 (Home Electronics Knob), 3608F02870 (Side Trim, L), 7507P08360 (Halogen Fitting), 240351207 (Refrigerator Crisper Drawer).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on BT85RK-4: 777S35193 (LABEL-PULL S), DA4100167A (Pba Main-s), 18453621GS (Ground Cable), 2001F08584 (Main Top), 2001F08590 (Top, Main (e), 3013201700 (Haier HOSE ORNB), 7510P04160 (Pressure Regulator), 7513P09660 (Manifold Pipe), 7103P10960 (T-nut (rv Hi), W10336329 (COOKTOP), 7502P09560 (Valve).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on BT85RK-4: DC9201040C (Washer Electronic Control Board).

Water inlet and drainage

Symptom: The unit isn't getting water when it should, or isn't draining or pumping it out when it should.

Check: Check the valve or pump for a clog or jammed object, and confirm the hose isn't kinked, restricted, or routed higher than the unit allows.

Parts in this group on BT85RK-4: WD15X10003 (Dishwasher Water Inlet Valve).

Before you buy

Match BT85RK4 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.