Parts for BN200V12 — Porter Cable

We found 90 parts confirmed to fit the Porter Cable BN200V12.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on BN200V12: 24611ZVD000 (COLLAR SHIF), 00470537 (Inner Door), 00425996 (Outlet), 903640 (Porter Cable Crankcase), 903644 (Porter Cable Hose/fitng), 902510 (Porter Cable Isolation), 895294 (Porter Cable MAGAZINE A), 902509 (Porter Cable Mount), 903604 (Porter Cable O-Ring), 903642 (Porter Cable Piston Assembly), 894759 (Porter Cable SAFETY B), 903602 (Porter Cable Seal), 911688 (Safety B A), 894777 (Anchor Block), 894760 (DRIVER GUIDE), 894781 (Nut), 894755 (Pin), 901886 (Porter Cable Carry Case), 903605 (Porter Cable Isolation), 902516 (Porter Cable Link), 902623 (Porter Cable Mesh Filter), 902515 (Porter Cable Off Link), 902553 (Porter Cable Pinion), A00972 (Cylinder), 894735 (Check Seal), 894746 (O-Ring), 894748 (O-Ring), 894734 (Piston Ring), 894765 (Safety), 894894 (Guide), 894731 (Piston), 894775 (Thumb Whl), 894745 (Bolt), 894752 (Bolt), 894662 (Cntc Plate).

Interior lighting

Symptom: The interior light doesn't turn on when the door opens.

Check: Confirm power is reaching the socket, then check the door-activated light switch before assuming the bulb itself is at fault.

Parts in this group on BN200V12: 902520 (Light pipe).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on BN200V12: 903646 (Porter Cable Actuator).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on BN200V12: 902519 (Porter Cable Clip), 902503 (Porter Cable Fitting), 902497 (Porter Cable Handle), 894763 (Porter Cable Lock Spring), 902538 (Porter Cable Screw), 902557 (Porter Cable Screw), 903835 (Porter Cable Screw), 896796 (Blade Housing), 894741 (DRIVER GUIDE COVER B), 894754 (MAGAZINE SPACER), 902508 (Porter Cable Bracket), 895298 (Porter Cable DRIVER GUIDE COVER A), 902502 (Porter Cable Screw), 902558 (Porter Cable Screw), 902559 (Porter Cable Screw), 894707 (Spring), 894780 (Spring Pin), 894774 (Spring), 894733 (Spacer), 894758 (Spring), 901560 (Battery Cover).

Water inlet and drainage

Symptom: The unit isn't getting water when it should, or isn't draining or pumping it out when it should.

Check: Check the valve or pump for a clog or jammed object, and confirm the hose isn't kinked, restricted, or routed higher than the unit allows.

Parts in this group on BN200V12: DA6201585A (Refrigerator Water Inlet Valve).

Door and drum seals

Symptom: A door or drum seal that has lost its grip, letting water or conditioned air escape past it.

Check: Inspect the seal for tears, flattening, or gaps, and check it against your model's part number before ordering.

Parts in this group on BN200V12: 894697 (Nailer Cap Gasket).

Before you buy

Match BN200V12 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.