Parts for A5892XRS — Whirlpool Dryer
We found 8 parts confirmed to fit the Whirlpool Dryer A5892XRS.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| 12500115 | Element Kit | 7 models | — |
| WP74003019 | Oven Bake Element | 77 models | $28.31–$51.61 |
| 7406P03960 | Element (8") | 116 models | — |
| 7430P01060 | Oven Sensor | 382 models | — |
| 1430306K | Receptacle | 712 models | — |
| 7403P23860 | Range Surface Element Control Switch | 1,405 models | — |
| 7201P04660 | Door Gasket | 1,546 models | — |
| 3801F21851 | "bracket, Ant" | 2,284 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on A5892XRS: 12500115 (Element Kit), WP74003019 (Oven Bake Element), 7406P03960 (Element (8")), 7430P01060 (Oven Sensor), 1430306K (Receptacle), 7403P23860 (Range Surface Element Control Switch).
Door and drum seals
Symptom: A drum seal that's worn through, letting the dryer pull in room air instead of pushing heated air through the load.
Check: Look for the drum seal fraying or missing where it meets the front or rear bulkhead -- worn felt or foam here is visible once the front panel is off.
Parts in this group on A5892XRS: 7201P04660 (Door Gasket).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on A5892XRS: 3801F21851 ("bracket, Ant").
Before you buy
Match A5892XRS exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Dryer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.