Parts for A283 — Whirlpool Washer
We found 19 parts confirmed to fit the Whirlpool Washer A283.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WP22003410 | Corrugated Drain Hose | 30 models | $50.56 |
| WPW10221114 | Gear Pinion | 30 models | $52.67 |
| WPY215234 | Injector Fill Hose | 30 models | $42.12 |
| 205134 | Motor Switch | 30 models | $67.51 |
| WPY206629 | PIN- COLLA | 30 models | $9.62 |
| WP22001448 | Pump-to-Siphon Break Drain Hose | 30 models | $63.64 |
| 206638 | Siphon Break Connector Kit | 30 models | $51.61 |
| 208847 | Syphon Break Elbow Kit with Clamp | 30 models | $32.63 |
| WP214765 | Syphon Break Gasket | 30 models | $53.20 |
| 202861 | Carton Of 25 | 55 models | — |
| W11129403 | BOLT | 64 models | $13.72–$21.45 |
| WP215581 | Agitator Shaft Spring | 76 models | $6.50–$9.62 |
| WP215447 | Washer Injector Sleeve | 77 models | $6.40–$9.62 |
| 202860 | Inlet Hose Kit | 423 models | $57.26 |
| 200461 | Hose Clamp | 470 models | — |
| 214739 | Spring Hose | 541 models | — |
| 211125 | Washer Drive Belt | 821 models | — |
| 211124 | Washer Pump Drive Belt | 821 models | — |
| 058700 | Silastic,adh | 859 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on A283: WP22003410 (Corrugated Drain Hose), WPY215234 (Injector Fill Hose), WP22001448 (Pump-to-Siphon Break Drain Hose), 206638 (Siphon Break Connector Kit).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on A283: WPW10221114 (Gear Pinion), 205134 (Motor Switch), WPY206629 (PIN- COLLA), 208847 (Syphon Break Elbow Kit with Clamp), 202861 (Carton Of 25), W11129403 (BOLT), WP215447 (Washer Injector Sleeve), 202860 (Inlet Hose Kit), 200461 (Hose Clamp), 058700 (Silastic,adh).
Door and drum seals
Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.
Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.
Parts in this group on A283: WP214765 (Syphon Break Gasket).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on A283: WP215581 (Agitator Shaft Spring).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on A283: 214739 (Spring Hose).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on A283: 211125 (Washer Drive Belt), 211124 (Washer Pump Drive Belt).
Before you buy
Match A283 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.