Parts for A25CAE — Whirlpool Washer
We found 11 parts confirmed to fit the Whirlpool Washer A25CAE.
Same parts list as A25CA (Whirlpool Washer). A25CAE shares an identical confirmed parts list with A25CA (Whirlpool Washer). That page is the canonical version of this parts list — use it if you want the primary reference, or stay here since the list below is exactly the same for A25CAE.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| W10175938 | BOLT | 30 models | $9.62 |
| WPW10221114 | Gear Pinion | 30 models | $52.67 |
| WPY215234 | Injector Fill Hose | 30 models | $42.12 |
| 12002352 | MOTOR-DRVE | 30 models | $256.38 |
| WP213045 | Outer Tub to Pump Hose | 30 models | $46.34 |
| WPY206629 | PIN- COLLA | 30 models | $9.62 |
| WP206680 | Washer Injector Hose w/Air Gap | 30 models | $77.22 |
| WP207166 | Lid Check Switch | 72 models | $19.26–$45.29 |
| WP215581 | Agitator Shaft Spring | 76 models | $6.50–$9.62 |
| WP215447 | Washer Injector Sleeve | 77 models | $6.40–$9.62 |
| 202860 | Inlet Hose Kit | 423 models | $57.26 |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on A25CAE: W10175938 (BOLT), WPW10221114 (Gear Pinion), 12002352 (MOTOR-DRVE), WP213045 (Outer Tub to Pump Hose), WPY206629 (PIN- COLLA), WP206680 (Washer Injector Hose w/Air Gap), WP207166 (Lid Check Switch), WP215447 (Washer Injector Sleeve), 202860 (Inlet Hose Kit).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on A25CAE: WPY215234 (Injector Fill Hose).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on A25CAE: WP215581 (Agitator Shaft Spring).
Before you buy
Match A25CAE exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.