Parts for 9200 — Bissell

We found 58 parts confirmed to fit the Bissell 9200.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on 9200: 602018 (Clip), 603345 (Set Screw), 602821 (Screw), 9020A (Clutch Spring), 90129 (Cord Cover), 2036675 (Carpet Cleaner Solution Tank Cap and Insert), 8980 (Post Hole Digger Earth Auger Spring).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on 9200: 602015 (Toro Screen), 602830 (Nut), 8955 (AUGER BOLT-SHCS, 3/8"-16 X 1-1/4", (AUGER TO POWERHEAD)), IB5816 (BOLT, 5mm X 0.8 X 16mm, (ICE BLADE TO AUGER)), 8920B (CENTRIFUGAL CLUTCH SHOES (2)), 60G30 (Clutch Drum), QT10N (ICE AUGER, 10"), IN58 (NUT, 5mm X 0.8 NYLOCK, (ICE BLADE TO AUGER)), 8916 (Post Hole Digger Clutch Drum), 8920 (Post Hole Digger Clutch Rotor), GT3HP (Post Hole Digger Fuel Tank), 8932 (Post Hole Digger Nut), 8651 (STRAP, BLADE PROTECTOR), 60G70 (Toggle Switch), 9005A (Twist Control), 8923 (Ball Bearing), EA10F (EARTH AUGER, 10" W/FISHTAIL POINT), EA2F (EARTH AUGER, 2", W/FISHTAIL POINT), EA6F (EARTH AUGER, 6" W/FISHTAIL POINT), EB10 (Earth Blade), EA8F (Post Hole Digger Auger), 8958HD (Post Hole Digger Auger Fishtail Point), 8922 (Post Hole Digger Ball Bearing), EB4 (Post Hole Digger Earth Blade, 4-in), ENUT (Post Hole Digger Nut), 8905I (Post Hole Digger Throttle Control Rod), 8918 (Post Hole Digger Washer), 8924 (Snap Ring), 8915 (DOWEL PIN, 1/4" X 1/2", HARDENED STEEL), 8958 (Fsh Tail Pnt), EBOLT (Post Hole Digger Bolt), EB6 (Post Hole Digger Earth Blade, 6-in), EB8 (Post Hole Digger Earth Blade, 8-in), 28340 (Post Hole Digger Ice Blade), 9025 (Clutch), 2036762 (Carpet Cleaner Power Cord), 9016 (Blower Wheel), 2104 (NUT-HEX LOCKING, 3/8-16 (2)), 2036679 (Carpet Cleaner Solution Tank Seal), 8913 (Post Hole Digger Output Shaft, 7/8-in), 2036758 (Carpet Cleaner Autoload Receiver), 9005 (Post Hole Digger Throttle Control Rod), 2036676 (Carpet Cleaner Solution Tank), 2036691 (Tool), 9214 (Post Hole Digger Earth Gear and Pinion).

Door and drum seals

Symptom: A door or drum seal that has lost its grip, letting water or conditioned air escape past it.

Check: Inspect the seal for tears, flattening, or gaps, and check it against your model's part number before ordering.

Parts in this group on 9200: 981362 (Toro Gasket), 8919 (Gasket).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on 9200: 75600 (Post Hole Digger Gear Case Housing, Lower), 8914 (Belt Spool), 8912 (Post Hole Digger Gear Case Primary Gear, 44-tooth), 2036804 (Carpet Cleaner Beater Bar Belt).

Before you buy

Match 9200 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.