Parts for 831248332 — Proform
We found 55 parts confirmed to fit the Proform 831248332.
Compatibility table
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on 831248332: 328317 (Proform Om,248332,tm), 328316 (Proform Litpac,24833), 316506 (Base,uprt,ar), 328891 (Frame,lift,a), 316509 (Motor Hood), 315803 (Technical Data Sheet), 316510 (Treadmill Deck Rail, Left), 316507 (Handrail, Left), 316663 (Treadmill Isolator), 260830 (Treadmill Safety Key Assembly), 316400 (Treadmill Upright, Right), 316395 (Uprt,lt,stlg), 298484 (Bolt, 5/16 x 1-1/2-in), 307032 (Thick Base Pad), 316434 (Treadmill Rear Foot, Left), 316569 (Treadmill Upper Body Arm, Left), 315692 (Treadmill Walking Board), 268476 (Weslo Decal,grnd W), 263228 (Wire,jmpr,00), 243797 (Clamp,cnsl M), 315068 (Straight Pin), 316433 (Treadmill Foot, Right Rear), 315689 (Treadmill Incline Motor), 316570 (Treadmill Upper Body Arm, Right), 236884 (Weider Exercise Equipment Flat Washer), 316391 (Console Crossbar), 315067 (Hitachi Set), 321938 (Treadmill Latch Pin Assembly), 286707 (Treadmill Incline Motor Sensor Kit), 157504 (Black & Decker Exercise Equipment Reed Switch).
Controls, timers and wiring
Symptom: A cycle that doesn't advance, an unresponsive display, or the unit not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on 831248332: 316581 (Treadmill Electronic Control Board), 316548 (Treadmill Upright Wire Harness), 211260 (Image Treadmill Incline Motor Wire Harness, 12-in), 266118 (Treadmill Motor Control Board).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on 831248332: 364028 (Treadmill Screw), 316412 (Plastic Spacer), 316514 (Lower Handrail Cap), 195683 (Exercise Equipment Screw), 316431 (Molded Belly Pan), 265234 (Treadmill Screw), 278652 (Treadmill Screw), 293636 (Treadmill Screw), 316505 (Treadmill Screw), 306715 (Base Cap), 271383 (Treadmill Screw), 227199 (Upright Grommet), 173169 (Black & Decker Power Cord Grommet).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on 831248332: 315693 (Treadmill Front Roller and Pulley), 248571 (Treadmill Rear Roller), 260687 (Treadmill Drive Belt), 270359 (Treadmill Walking Belt), 297197 (Treadmill Drive Motor), 219170 (Treadmill Walking Belt Lubricant, 3-pack), 219168 (Treadmill Walking Belt Lubricant), 128457 (Treadmill Walking Belt Alignment Tool).
Before you buy
Match 831248332 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.