Parts for 7DU900PCDQ0 — Whirlpool Washer
We found 9 parts confirmed to fit the Whirlpool Washer 7DU900PCDQ0.
Same parts list as 7DU900PCDB0 (Whirlpool Washer). 7DU900PCDQ0 shares an identical confirmed parts list with 7DU900PCDB0 (Whirlpool Washer). That page is the canonical version of this parts list — use it if you want the primary reference, or stay here since the list below is exactly the same for 7DU900PCDQ0.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| W11027965 | Silverware Basket | 30 models | $134.34 |
| 3376404 | Cover Dispenser | 276 models | — |
| 3378779 | Inlet Valve | 277 models | — |
| 3372028 | Dishwasher Detergent Dispenser Cover Hinge Pin | 454 models | — |
| 3368953 | Door Latch | 456 models | — |
| 3369052 | Deflector | 543 models | — |
| 3369777 | Thermostat | 694 models | — |
| 3376927 | Dishwasher Door Seal | 1,203 models | — |
| 717273 | Dishwasher Heating Element Rubber Washer | 2,130 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on 7DU900PCDQ0: W11027965 (Silverware Basket).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on 7DU900PCDQ0: 3376404 (Cover Dispenser), 3372028 (Dishwasher Detergent Dispenser Cover Hinge Pin).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on 7DU900PCDQ0: 3378779 (Inlet Valve).
Door, lid switches and latches
Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.
Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.
Parts in this group on 7DU900PCDQ0: 3368953 (Door Latch).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on 7DU900PCDQ0: 3369052 (Deflector).
Heat control (thermostats, fuses, heating element)
Symptom: The appliance runs but heats or cools inconsistently, or shuts off partway through a cycle.
Check: With the appliance unplugged, check continuity across the part with a multimeter -- no continuity means it has failed.
Parts in this group on 7DU900PCDQ0: 3369777 (Thermostat), 717273 (Dishwasher Heating Element Rubber Washer).
Door and drum seals
Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.
Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.
Parts in this group on 7DU900PCDQ0: 3376927 (Dishwasher Door Seal).
Before you buy
Match 7DU900PCDQ0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.