Parts for 625348460 — Kenmore

We found 62 parts confirmed to fit the Kenmore 625348460.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on 625348460: 7150327 (Kenmore Filter Scrn), 7152963 (Kenmore Salt Strg Tk), 7152989 (Kenmore Brine Table), 7153202 (Nosl & Vnt A), 7106962 (Water Softener Brine Well), 7324895 (Water Softener Salt Tank Rim), 7131365 (Water Softener Brine Valve Screen), 7082150 (Ecodyne Wing Nut (White)), 7094979 (Insert (White)), 7324918 (Water Softener Faceplate), 7285944 (Water Softener Valve Motor), 7082087 (Kenmore Elite Water Softener Rotor Wave Washer), 7176161 (O-Ring (Black)), 7170254 (Water Softener O-Ring), 7081764 (Whirlpool Water Softener Nozzle and Venturi Seal), 0507369 (Whirlpool Water Softener Nut), 7146043 (Water Softener Filter Screen), 7170319 (Water Softener O-Ring), 7092642 (Whirlpool Plug (Black)), 7039068 (O-Ring (Black)), 7095030 (Water Softener Filter Screen), 423441 (Permanganate), 7275907 (Water Softener Power Transformer), 7199232 (Kenmore Elite Water Softener Rotor and Disc), 7103964 (Replacement Rotor), 7134224 (Disc Seal Kt), 1148800 (Water Softener Flow Plug 1148800), 7129716 (Kenmore Water Softener Seal Kit), 7082053 (Kenmore Elite Water Softener Valve Body).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on 625348460: 7231563 (Cover (White)), 7148875 (Ecodyne Screw), 7155115 (Whirlpool Brine Well Cover (Gray)), 7308904 (Guide Cap), 7168621 (Screen Support (Black and Blue)), 7288112 (Water Filtration System Valve Motor Bracket), 7234414 (Water Softener Turbine Sensor), 7176292 (Ecodyne Water Softener Clip), 7092294 (Water Softener Clip), 0900857 (Water Softener Screw, 6 x 20 - 3/8-in), 7077472 (Whirlpool Expansion Pin), 7088033 (Whirlpool Water Softener Clip), 7142942 (Ecodyne Water Softener Clip), 7131755 (Screw, #6-20 x 7/8-in (Steel)), 7284964 (Water Softener Cam and Gear), 7081201 (Water Softener Clip (Gray)), 7129889 (Water Softener Drain Plug Spring), 7199729 (Water Softener Venturi Valve Cap), 7074123 (Waterworks Water Softener Screw), 7070412 (Whirlpool Screw (Black)), 2204101 (Whirlpool Water Softener Turbine Support), 7117858 (Whirlpool Water Softener Turbine), 7139999 (Water Softener Drain Tube), 7081104 (Water Softener Nozzle and Venturi Housing), 7113016 (Ecodyne Water Softener Brine Tubing), 7116713 (Whirlpool Water Softener Clip).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on 625348460: 7118333 (Waterworks Water Softener Switch Wire Harness), 7084330 (Wire Harness (Black)).

Door and drum seals

Symptom: A door or drum seal that has lost its grip, letting water or conditioned air escape past it.

Check: Inspect the seal for tears, flattening, or gaps, and check it against your model's part number before ordering.

Parts in this group on 625348460: 7114533 (Water Softener Nozzle and Venturi Gasket Kit).

Water inlet and drainage

Symptom: The unit isn't getting water when it should, or isn't draining or pumping it out when it should.

Check: Check the valve or pump for a clog or jammed object, and confirm the hose isn't kinked, restricted, or routed higher than the unit allows.

Parts in this group on 625348460: 7170327 (Waterworks Water Softener Drain Hose Adapter O-Ring, 5/8 x 13/16-in), 7024160 (Waterworks Water Softener Drain Hose Connector).

Before you buy

Match 625348460 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.