Parts for 625348261 — Kenmore

We found 42 parts confirmed to fit the Kenmore 625348261.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on 625348261: 7148338 (Water Filtration System Tannin Resin), 7285936 (Motor), 7137507 (Water Softener Nozzle and Venturi Assembly), 7131365 (Water Softener Brine Valve Screen), 7082150 (Ecodyne Wing Nut (White)), 7337474 (Motormount), 7310197 (Water Softener Brine Valve), 7084607 (Water Softener Flow Plug), 7133456 (Kenmore O-RING 110), 7170246 (O-Ring), 7170254 (Water Softener O-Ring), 7170270 (Water Softener O-Ring), 7123613 (Water Softener Silicone Grease), 0507369 (Whirlpool Water Softener Nut), 7146611 (Installation Manual), 7170319 (Water Softener O-Ring), 7133464 (Waterworks Reverse Osmosis System O-Ring), 7199232 (Kenmore Elite Water Softener Rotor and Disc), 7129871 (Waterworks Water Softener Bypass Valve 7129871), 7134224 (Disc Seal Kt), 7077870 (Water Softener Distributor Top), 7170262 (Water Softener O-Ring, 1-1/8 x 1-3/8-in), 1148800 (Water Softener Flow Plug 1148800), 7129716 (Kenmore Water Softener Seal Kit), 1202600 (Water Softener Ferrule Nut).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on 625348261: 7148875 (Ecodyne Screw), 7095470 (Water Softener Brine Tube), 7167659 (Water Softener Nozzle and Venturi Screen Support), 0900857 (Water Softener Screw, 6 x 20 - 3/8-in), 7103972 (Screw), 7131755 (Screw, #6-20 x 7/8-in (Steel)), 7129889 (Water Softener Drain Plug Spring), 7074123 (Waterworks Water Softener Screw), 7139999 (Water Softener Drain Tube), 7113016 (Ecodyne Water Softener Brine Tubing), 1205500 (Clip), 7116713 (Whirlpool Water Softener Clip), 7085263 (Whirlpool Water Softener Valve Body Cover).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on 625348261: 7259927 (Wire Harness).

Water inlet and drainage

Symptom: The unit isn't getting water when it should, or isn't draining or pumping it out when it should.

Check: Check the valve or pump for a clog or jammed object, and confirm the hose isn't kinked, restricted, or routed higher than the unit allows.

Parts in this group on 625348261: 7024160 (Waterworks Water Softener Drain Hose Connector).

Door and drum seals

Symptom: A door or drum seal that has lost its grip, letting water or conditioned air escape past it.

Check: Inspect the seal for tears, flattening, or gaps, and check it against your model's part number before ordering.

Parts in this group on 625348261: 7204362 (Water Softener Venturi Gasket), 7187772 (Water Softener Nozzle and Venturi with Gasket).

Before you buy

Match 625348261 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.