Parts for 2611 — Porter Cable

We found 39 parts confirmed to fit the Porter Cable 2611.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on 2611: BN9613748D (Assembly Cover), 90168V09A01 (Screw), SC221 (Cap Screw), 4153566 (SCREW NUT ASM. PACKAGE), SC101 (Set Screw), 4580404 (Bracket), 4580400 (Bracket), BG108 (Bracket), STD503705 (Set Screw, 2-pack), NP (BASE COVER (TOP AND BASE COVERS ARE AVAILABLE IN TWO, NON-COMPATIBLE TYPES. TO REPLACE, ORDER THE PART NUMBER THAT COINCIDES WITH THE SERIAL NUMBER LOCATED ON THE SPINWRITER FRAME.)).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on 2611: 843782 (Briggs & Statton Float Bowl).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on 2611: XZ072 (Diode I), 16087ZW5000 (Plain Washer), 394220 (Toro Hitch Adp Wa), WA110 (Flat Washer), NII107 (HEX NUT FOR TIE IRON STUD), NU105 (Hex Nut), NU109 (Hex Nut), NII123 (LOCK NUT FOR HOOK (AP1801 ONLY)), PA101 (Pawl), GE117 (Pinion L. H.), SH125 (Shaft), MI344 (Swivel Hitch), RD269 (Tie Rod), CR208 (Wheel Cvr-r.), AS2040 (Draw Bar), KN121 (Lower Knife), PN123 (Pin), 4156680 (Skewer), ST134 (Stud), 4156433 (Rotiss Motor), 4156579 (Spit Rod), STD525010 (Hex Bolt), EBR36870701 (Washer User Interface), WH08X10065 (Washer Door Boot), A10193 (Cord Set), 7420305A0637 (MTD Tiller Tine).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on 2611: BR116 (Roller Brkt), STD315654 (Tapered Roller Bearing).

Before you buy

Match 2611 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.