Parts for 12211 — MTD

We found 36 parts confirmed to fit the MTD 12211.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on 12211: 1117A (Troy-Bilt Depth Bar), 1917746 (Troy-Bilt Shoulder Washer), 1982612 (Troy-Bilt Tiller Shear Pin), 686040670638 (Mtd Red), GW9442P (Ace Cable Wheel), 61104002 (Ace Eccentric Shaft), 1916185001 (Bar-drag 121), 1916784P (Troybilt Tiller Reverse Cable), GW20712 (Ace Tiller Wheel Drive Clutch), GW20913 (Ace Tiller Tine Shaft Worm Gear), 777S30649 (Label Tine), 74804087A (Tiller Washer), GW20896 (Troy-Bilt Shaft-Tiller), GW20914 (Ace Tiller Worm Gear), 1186208 (Troy-Bilt Nut), 9373 (Control Rod), 9126 (Troy-Bilt Grip), 71404048 (Pin:cot:int), 92104031 (Tiller Wheel Shaft Oil Seal).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on 12211: 786040670637 (Support-rh E), 1111606 (Troy-Bilt Screw), 1900475010 (Ace Tiller Handle Adjustment Bracket), 686040780638 (Shield Assembly), 1114748 (Ace Screw-rh), 71004460 (SCREW), 73204077 (Troybilt Reverse Spring), 1100799 (Troy-Bilt Hex Screw, 5/16-18 X 1-1), 1767754 (Troy-Bilt Screw), 9552 (Troy-Bilt Screw).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on 12211: 61904130 (Ace Machine Pulley Engine), 73105290 (Troybilt Tiller Belt Guard), 75604169 (Ace Idler Pulley), 61904123 (Ace Transaxle Pulley), 73204081 (Troy-Bilt Guide-Belt), 95404095 (Belt-v Rev Drv 3).

Door and drum seals

Symptom: A door or drum seal that has lost its grip, letting water or conditioned air escape past it.

Check: Inspect the seal for tears, flattening, or gaps, and check it against your model's part number before ordering.

Parts in this group on 12211: 20694 (Troy-Bilt Gasket).

Before you buy

Match 12211 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

Check inside a door opening, on a back or side panel, or behind a removable panel or drawer for a label printed with the model and serial number. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.