Parts for 1106118252 — Kenmore Dryer
We found 16 parts confirmed to fit the Kenmore Dryer 1106118252.
Same parts list as 1106118232 (Kenmore Dryer). 1106118252 shares an identical confirmed parts list with 1106118232 (Kenmore Dryer). That page is the canonical version of this parts list — use it if you want the primary reference, or stay here since the list below is exactly the same for 1106118252.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| 280078 | Dryer Door Inner Panel | 10 models | $98.75 · Amazon |
| WP90406 | Commercial Laundry Appliance Cage Nut | 18 models | $4.72 · Amazon |
| 161897 | Screw | 56 models | $4.94 · Amazon |
| 297787 | Bumper | 128 models | $22.04 · Amazon |
| 230148 | Terminal Block | 171 models | $33.95 · Amazon |
| 230132 | Spring | 285 models | $7.47 · Amazon |
| 295998 | Lever | 323 models | $8.29 · Amazon |
| 98234 | Dryer Cabinet Clip | 334 models | $62.43 · Amazon |
| 98605 | Screw | 368 models | $41.38 · Amazon |
| 279638 | Toe Panel Clip Kit | 542 models | $10.19 · Amazon |
| 232402 | Clamp | 554 models | $4.42 · Amazon |
| WP691371 | Blower Belt | 702 models | $55.29 · Amazon |
| 236877 | Catch | 740 models | $7.35 · Amazon |
| WP337186 | Dryer Single Door Spring | 986 models | $7.47 · Amazon |
| W11613302 | SEAL-DOOR | 1,027 models | $38.96 · Amazon |
| 236876 | Door Strike | 2,042 models | $17.99 · Amazon |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on 1106118252: 280078 (Dryer Door Inner Panel), 161897 (Screw), 230132 (Spring), 98234 (Dryer Cabinet Clip), 98605 (Screw), WP337186 (Dryer Single Door Spring).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on 1106118252: WP90406 (Commercial Laundry Appliance Cage Nut), 297787 (Bumper), 295998 (Lever), 232402 (Clamp), 236877 (Catch), W11613302 (SEAL-DOOR), 236876 (Door Strike).
Controls, timers and wiring
Symptom: A cycle that doesn't advance, an unresponsive display, or the dryer not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on 1106118252: 230148 (Terminal Block).
Venting and airflow
Symptom: A dryer that needs multiple cycles to dry, runs unusually hot, or repeatedly trips its heat-limit switch.
Check: Clear the lint screen and the full vent run to the outside wall -- a restricted vent is the single most common cause of long dry times and repeat thermal-fuse failures.
Parts in this group on 1106118252: 279638 (Toe Panel Clip Kit).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on 1106118252: WP691371 (Blower Belt).
Before you buy
Match 1106118252 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Kenmore Dryer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Other models with this exact parts list
Each model below is confirmed to share the identical compatible-parts list with this one.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.