Parts for 11020102312 — Whirlpool Washer
We found 24 parts confirmed to fit the Whirlpool Washer 11020102312.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| W11695476 | BRACE | 30 models | $50.56 |
| WPW10392041 | Bezel | 30 models | $9.62 |
| WPW10192089 | Bleach Dispenser | 30 models | $9.62 |
| W10676061 | COVER | 30 models | $24.18–$27.36 |
| W10404050 | Lid Latch Assembly | 30 models | $50.56–$50.57 |
| WPW10240513 | Lid Latch Strike | 30 models | $31.58–$31.59 |
| WPW10687506 | Washer Leveling Leg | 30 models | $20.37 |
| WP91770 | Washer Lid Hinge | 30 models | $20.37 |
| WPW10280024 | Washer Retainer | 30 models | $50.56 |
| WPW10273971 | Washer Screw | 30 models | $7.47 |
| W10537442 | Washer Damper | 35 models | — |
| W11454741 | Gear Case | 50 models | $159.72–$204.36 |
| W10324647 | Washer Sealtub | 51 models | $43.68–$61.56 |
| W10780045 | Suspension Rod Kit | 69 models | $53.20–$76.17 |
| W11244231 | Washer Drain Hose | 77 models | $12.48–$26.95 |
| W10239973 | Pulley | 78 models | — |
| W10597177 | Washer Brake Actuator | 111 models | — |
| W10473144 | Washer Gear Case | 150 models | — |
| W10238287 | Washer Lid Lock Assembly | 359 models | — |
| W10006382 | Spring | 364 models | — |
| W10006353 | Cam | 463 models | — |
| W10006354 | Cam | 463 models | — |
| W10006384 | Washer Drive Belt | 611 models | — |
| 389140 | Washer Drive Block | 4,956 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on 11020102312: W11695476 (BRACE), WPW10192089 (Bleach Dispenser), WPW10280024 (Washer Retainer), W10537442 (Washer Damper), 389140 (Washer Drive Block).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on 11020102312: WPW10392041 (Bezel), W10676061 (COVER), WPW10273971 (Washer Screw), W10006382 (Spring), W10006353 (Cam), W10006354 (Cam).
Door, lid switches and latches
Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.
Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.
Parts in this group on 11020102312: W10404050 (Lid Latch Assembly), WPW10240513 (Lid Latch Strike), WP91770 (Washer Lid Hinge), W10238287 (Washer Lid Lock Assembly).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on 11020102312: WPW10687506 (Washer Leveling Leg), W10324647 (Washer Sealtub), W10780045 (Suspension Rod Kit).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on 11020102312: W11454741 (Gear Case), W10239973 (Pulley), W10597177 (Washer Brake Actuator), W10473144 (Washer Gear Case), W10006384 (Washer Drive Belt).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on 11020102312: W11244231 (Washer Drain Hose).
Before you buy
Match 11020102312 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.