Parts for 11015952400 — Whirlpool washing machine Repair

Looking for parts that fit your Whirlpool 11015952400 washing machine? This model has 86 parts documented in our catalog -- below are the 45 most model-specific matches, plus what failure each one points to and how to make sure you are ordering for the right unit.

Compatible Parts for 11015952400

This model has 86 parts documented in our catalog. The 45 below are the most model-specific matches -- the ones shared with the fewest other models -- sorted from most specific to broadest fit. Where we have a page with full specs for a part, its number links there; otherwise, search that exact part number directly.

Reference Price is an informational market range seen for that part across the catalog -- not an offer, and not a price charged by RepairKitHub. RepairKitHub does not sell parts; it links out to Amazon.

Most Common Failures on This Model

The parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on the 11015952400: 285205 (BEARING), 285244 (Rear Leveling Foot), 285438 (Brake Shoe Assembly), 285654 (PARTS-MISC), 285975 (DISPENSER), 388253A (NEUTRAL DRAIN KIT), W10817888 (Washer Lining), W10820044 (Washer Cordpower), W11033823 (Washer Ringwire), WP353244 (Washer Water Pressure Hose Cut to Fit), WP387240 (Ring Balance), WP3949550 (Washer Washer).

Suspension and tub hardware

Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.

Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.

Parts in this group on the 11015952400: 285219 (Suspension Pads - Package of 3), 285744 (Tub Wear Pads - Package of 3), 80040 (Agitator Directional Cogs), W10389328 (Inner Tub Basket), WP3354845 (Agitator Clip), WP3359452 (Leveling Leg Locking Nut), WP389387 (Shaft, Agitator (Complete)), WP3946509 (Plate Suspension), WP63907 (Suspension Spring).

Water inlet and drainage

Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.

Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.

Parts in this group on the 11015952400: 285320 (Washer Siphon Break Kit), 285664 (Drain Hose with Clamp), 285666 (Drain Hose), 285702 (Drain Hose Extension), 285871 (Tub-to-Pump Hose Kit), WP3357331 (Upper Drain Hose Clamp), WP3360977 (Washer Water Inlet Syphon).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on the 11015952400: 285353 (Brake and Drive Tube Retainer Ring Kit), 285901 (Counter Balance Spring Kit), 63424 (CABINET), 8316845 (Leveling Spring), W10816321 (KNOB), WP2172937 (Washer Wire Connector), WP3355454 (Anti-Rattle Clip), WP3357978 (PANEL-REAR), WP3360056 (3-Circuit T.P.A. Connector Plug), WP62505 (Connector), WP62750 (Spacer), WP62780 (Cabinet Retaining Clip), WP64067 (Spring Outer Bracket).

Door, lid switches and latches

Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.

Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.

Parts in this group on the 11015952400: WP21097 (Lid Hinge Pad).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on the 11015952400: WP3349985 (Washer Gear Case Cover Seal).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on the 11015952400: WP3400818 (Screw Timer Mounting).

Heat control (thermostats, fuses, heating element)

Symptom: The appliance runs but heats or cools inconsistently, or shuts off partway through a cycle.

Check: With the appliance unplugged, check continuity across the part with a multimeter -- no continuity means it has failed.

Parts in this group on the 11015952400: WP3979346 (Washer Water Inlet Valve And Thermistor Assembly).

How to Confirm This Is Your Model

On most Whirlpool top-load washers, the model and serial plate is under the lid, on the frame around the rim of the tub. On front-load washers, it is usually just inside the door frame, or on a printed label on the back panel.

Whirlpool model numbers are not random strings: they typically open with a letter prefix that identifies the appliance platform or series, followed by a run of digits that encode capacity, features, or generation, and close with a letter-and-digit combination that usually maps to color and a production revision. That closing piece matters more than it looks -- two model numbers that differ only in the last character (for example ending in 0 versus 1) can belong to different production runs with different part revisions, even though the rest of the number, and the appliance's outward appearance, are identical. That is why part fitment has to be checked against the complete model number, not an abbreviated version of it.

Before ordering anything for the 11015952400, match the complete string on your plate -- letters, digits and all -- against 11015952400, rather than relying on memory or a partial number.

Before You Buy

Once you have matched a part number above to your repair, check that exact string against what is stamped on your washing machine's plate and, if it is still legible, printed on the part you are replacing. RepairKitHub does not sell parts directly -- each part number above is a starting point for a search on Amazon, where you can compare listings against the number you have confirmed.

More Resources

• Look up your model number -- search the full catalog directly by model or part number.
• Start from a symptom -- browse repair guides organized by what the appliance is doing wrong.
• Other Whirlpool washing machine models: 11020022011, 11020022012, 11020102310, 11020102311