Parts for 051720 — Hoover Washer

We found 11 parts confirmed to fit the Hoover Washer 051720.

Compatibility table

All 11 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
162961INSULATING POD-051722 models— · Amazon
169360DRIVE BELT-T1001 (MOTOR COMP. 43172004)23 models— · Amazon
162927PUMP COMPLETE-051723 models$8.10 · Amazon
21312708Washer23 models— · Amazon
046100MOTOR BRUSH ASSEM24 models— · Amazon
28389205TIMER - WASH MACHINE26 models— · Amazon
43251005PULSATOR PULLEY/CUP27 models$6.99 · Amazon
716882Spin Belt32 models— · Amazon
045517Wire Holder43 models$2.16 · Amazon
21312710Washer48 models— · Amazon
DC9719289BWasher Drain Pump Assembly55 models$115.74 · Amazon

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on 0517-20: 162961 (INSULATING POD-0517), 162927 (PUMP COMPLETE-0517), 21312708 (Washer), 046100 (MOTOR BRUSH ASSEM), 045517 (Wire Holder), 21312710 (Washer).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on 0517-20: 169360 (DRIVE BELT-T1001 (MOTOR COMP. 43172004)), 43251005 (PULSATOR PULLEY/CUP), 716882 (Spin Belt).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on 0517-20: 28389205 (TIMER - WASH MACHINE).

Water inlet and drainage

Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.

Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.

Parts in this group on 0517-20: DC9719289B (Washer Drain Pump Assembly).

Before you buy

Match 051720 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Hoover Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.