Frigidaire Refrigerator: Light Not Working
Quick answer: A dark refrigerator is usually a burned-out bulb, a worn door switch, or a corroded socket, and on newer models a failed LED module or its low-voltage supply. Check the bulb first, then the switch, before opening up the control side.
- Unplug the refrigerator before changing the bulb or testing the socket.
- Use only the bulb type and wattage listed on the light cover; incorrect bulbs overheat the socket.
- LED light boards run on low voltage from the control board; never connect them to household power.
Why is my refrigerator light not working?
A dark refrigerator is usually a burned-out bulb, a worn door switch, or a corroded socket, and on newer models a failed LED module or its low-voltage supply. Check the bulb first, then the switch, before opening up the control side.
Our fitment data covers 15,744 Frigidaire refrigerator models and 3,450 Frigidaire refrigerator parts, so the part links below are filtered to this brand; always confirm your model number before ordering.
Most Likely Causes, in Order
1. Light bulb
Incandescent bulbs simply burn out, especially with frequent door openings and cold cycling.
How to check: Remove the cover and inspect the filament; a broken filament or darkened glass means it is dead. Try a known-good bulb of the same type.
Fix: Replace the bulb. (Difficulty: Easy)
Matching Frigidaire parts:
- Refrigerator Light Bulb 241555401 — $17.39 · 12161 models
- Light Bulb 5304421616 — $24.14 · 933 models
- LED Light Bulb 5304511738 — $24.51 – $38.09 · 915 models
2. Door switch
The door switch closes the light circuit when the door opens; a worn switch stays open so the light never comes on.
How to check: Press the switch with your finger; you should feel and hear a click. Unplug the unit, remove the switch, and test for continuity with the plunger released.
Fix: Replace the door switch. (Difficulty: Easy)
Matching Frigidaire parts:
- Door Light Switch 241547902 — $25.40 – $44.34 · 1029 models
- Door Light Switch 8582405058057 — $6.96 · 78 models
3. Light socket and wiring
Corrosion or a burnt socket prevents contact with the bulb base.
How to check: Unplug the unit and inspect the socket for green or black corrosion. Check that the wire terminals are firmly attached. Measure for voltage at the socket with the door switch pressed if you are comfortable doing so.
Fix: Clean the contacts or replace the socket assembly. (Difficulty: Moderate)
No Frigidaire part for this cause is in our catalog yet; search by your model number.
4. LED light module
LED assemblies fail as a unit or lose their low-voltage supply from the control board.
How to check: If some LEDs work and others do not, the module is failing. If all lights are dead and the door switch is good, check the connector at the module and the low-voltage output from the control board.
Fix: Replace the LED module; if there is no voltage from the board, replace the board. (Difficulty: Moderate)
No Frigidaire part for this cause is in our catalog yet; search by your model number.
Other Frigidaire parts the catalog tags for this symptom
- Light Socket 241559801 — $46.99 – $65.42 (light intermittent; no light)
- LED Light Board 242196204 — $40.08 – $57.94 (dim; flickering; no light)
- Refrigerator Light Socket 218906802 — $12.58 – $31.14 (light intermittent; no light)
- Refrigerator Light Bulb 5304522314 — $24.35 – $53.29 (bulb burned out; no light)
- Refrigerator Light Bulb 5304519036 — $40.25 – $58.52 (bulb burned out; no light)
- LAMP 5304523011 — $24.62 – $90.94 (dim; flickering; no light)
Popular Frigidaire refrigerator models
Confirm the model number on the rating plate before ordering. Each model page lists every compatible part.
Frequently Asked Questions
The light flickers or is dim. Is that the bulb?
A dim or flickering LED usually means the module is failing or its connector is loose; for incandescent bulbs, check the socket contact.
The light works but goes off after a while. Why?
Many models turn off the light after several minutes with the door open to prevent heat. Close and reopen the door to reset it.
Can a bad door switch affect cooling?
Yes on many models: the same switch controls the evaporator fan, so a stuck switch can stop the fan and cause poor cooling.
When to Call a Professional
Call a technician if the LED module has no low-voltage supply from the control board or if the wiring inside the door hinge is damaged.