How to Install Spring 00491606 in a Bosch Washer
If your Bosch washer is washer not working properly, a worn spring can be part of the problem. This guide on How to Install Spring 00491606 helps you replace the part with steady hands and normal shop tools. You can finish the job in 30 to 60 minutes if you work carefully. The repair fits a medium difficulty level, so take your time and do each step in order.
Before you start, unplug the washer and shut off the water supply. That keeps the work safe and keeps the cabinet stable while you move parts. You do not need special training, but you do need patience and a clean work area. A rushed repair can leave the spring out of place or damage nearby parts.
This Bosch spring is tied to these models: WFMC2100UC, WFMC2201UC, WFMC2201UC, WFMC3200UC, and WFMC3301UC. If your machine matches one of those models, keep the old part until the new one is in place. Bosch support can help you verify service details if you need a second check: Support & Service.
Final Checklist
Before you close the job, run this quick check:
- Power is unplugged during the repair
- Water is off if the washer needed to move
- Old and new spring match in shape
- Spring sits fully in both anchor points
- No wire, hose, or bracket is pinched
- Panel is tight and flush
- Washer stands level
- Test cycle runs with less shake
If all eight items look good, your repair is done. Keep the old part for comparison until you know the machine runs well. If the symptom comes back, inspect the rest of the suspension system before you order more parts.