Whirlpool Range / Oven Surface Element Not Heating — Causes & Repair Parts
Whirlpool Range / Oven Surface Element Not Heating — Causes & Repair Parts
Whirlpool range / oven showing surface element not heating? Here are the 4 most common causes, how to diagnose each, and 7 OEM-compatible repair parts available with fast US shipping.
Common Causes of Surface Element Not Heating in Whirlpool Range / Ovens
- Burned-out surface element or burner coil: Electric coil elements develop breaks and stop heating. Replace the coil or the element block.
- Defective surface element switch: The infinite switch controls heat level. A failed switch may give no heat or only one heat setting.
- Igniter not sparking (gas): The spark electrode produces the ignition spark for gas burners. A cracked electrode or broken wire stops sparking.
- Gas valve solenoid failure: The gas valve solenoid opens to allow gas flow. If the solenoid coil burns out, the burner will not light.
How to Diagnose Your Whirlpool Range / Oven
- Turn off the range and allow it to cool completely before inspection.
- For electric ranges: visually inspect the bake element at the oven bottom for holes, burns, or cracks.
- For gas ranges: check that gas supply is on at the shutoff valve behind the unit.
- Test the oven temperature sensor resistance with a multimeter — should read ~1,080 ohms at room temperature (68°F).
- Test the surface element switch continuity — infinite switches should show variable resistance as you turn the knob.
- Check the control board for burned components or blown fuses on the board.
- For gas ignition: listen for clicking sound and observe whether the spark electrode produces a visible spark.
Compatible Repair Parts (7 in stock)
All parts below are OEM-compatible and verified to fit Whirlpool range / ovens.
Whirlpool Surface Element Switch (WP3149400) - Compatible with Whirlpool
OEM: WP3149400
$61.96
View Part →Whirlpool Bake Element (WPW10308477) - Compatible with Whirlpool
OEM: WPW10308477
$57.15
View Part →Whirlpool Bake or Broil Spark Electrode (WP9758079) - Compatible with Whirlpool
OEM: WP9758079
$53.30
View Part →Whirlpool Burner Drip Bowl (WPW10196405) - Compatible with Whirlpool
OEM: WPW10196405
$15.30
View Part →Related Repair Guides
When to Call a Professional
If surface element not heating persists after replacing the parts above, or you encounter issues with the sealed refrigerant system, gas supply connections, or high-voltage wiring, consult an authorized Whirlpool repair technician or a licensed appliance service professional.
Why RepairKitHub
- OEM-compatible aftermarket parts at lower cost than OEM pricing
- Fast US shipping via Amazon — most parts arrive in 1-3 business days
- Comprehensive fitment guarantee — parts verified for Whirlpool range / ovens
- Free troubleshooting articles covering every major symptom