Parts for YWET4024HW0 — Whirlpool Washer

We found 24 parts confirmed to fit the Whirlpool Washer YWET4024HW0.

Compatibility table

All 24 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
8066064Drum Belt3 models
W11684623FILTER4 models$25.75
W11189136LID4 models$276.02
W11189137Laundry Center Washer Electronic Control Board4 models$276.50
W11176431Levelling Leg4 models$19.30
W11174583SUSPENSION4 models$89.33
W11665996GEARCASE8 models$258.23
W11676908TOP8 models$189.76
W10359269Dryer Drum Support Roller Shaft9 models
W11371714LATCH9 models$101.79
W10906604PUMP-WATER9 models$140.85
W10882132TUB-OUTER9 models$138.11
W10869495Unbalance Switch9 models$68.86
W10906602VALVE9 models$96.52
W10882404WASHPLATE9 models$120.55
W10854240Timer24 models$138.61
3389441Dryer Door Catch79 models
339956Dryer Lint Screen Housing Foam Seal242 models
3392519Dryer Thermal Fuse461 models
W10512946Dryer Support Roller Tri-Ring Washer607 models
3397590Support1,362 models
279457Heating Element Connection Wire Kit2,642 models$9.62–$10.42
691366Dryer Idler Pulley5,974 models
696144Strike6,444 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on YWET4024HW0: 8066064 (Drum Belt), W10359269 (Dryer Drum Support Roller Shaft), W10512946 (Dryer Support Roller Tri-Ring Washer), 691366 (Dryer Idler Pulley).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on YWET4024HW0: W11684623 (FILTER), W11189136 (LID), W11176431 (Levelling Leg), W11665996 (GEARCASE), W11676908 (TOP), W11371714 (LATCH), W10906604 (PUMP-WATER), W10869495 (Unbalance Switch), W10906602 (VALVE), 696144 (Strike).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on YWET4024HW0: W11189137 (Laundry Center Washer Electronic Control Board), W10854240 (Timer).

Suspension and tub hardware

Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.

Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.

Parts in this group on YWET4024HW0: W11174583 (SUSPENSION), W10882132 (TUB-OUTER), W10882404 (WASHPLATE).

Door, lid switches and latches

Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.

Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.

Parts in this group on YWET4024HW0: 3389441 (Dryer Door Catch).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on YWET4024HW0: 339956 (Dryer Lint Screen Housing Foam Seal), 3397590 (Support).

Heat control (thermostats, fuses, heating element)

Symptom: The appliance runs but heats or cools inconsistently, or shuts off partway through a cycle.

Check: With the appliance unplugged, check continuity across the part with a multimeter -- no continuity means it has failed.

Parts in this group on YWET4024HW0: 3392519 (Dryer Thermal Fuse), 279457 (Heating Element Connection Wire Kit).

Before you buy

Match YWET4024HW0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.