Parts for YWED97HEDC1 — Whirlpool Dryer

We found 53 parts confirmed to fit the Whirlpool Dryer YWED97HEDC1.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on YWED97HEDC1: W10433196 (Console Shell Assembly), W10800231 (Iml Asm Dry), W10800232 (Iml Asm Dry), W10800233 (Iml Asm Dry), W10704365 (Side Venting Kit), W10280771 (Dryer Baffledrm), W10905013 (DOOR), W11125442 (GRILL-OUT), W10673491 (Front Bulkhead), W10815373 (VALVE), WPW10208419 (Plate), W11240283 (CATCH), W11758174 (SCREEN - LINT. ALPHA), W11676493 (Seal), W11193479 (SEAL), W11310035 (SEAL), W10446202 (Touch-Up Paint), PT400L (CORD-POWER), W11299301 (BULKHEAD), WPW10080190 (Dryer Nut, 3/8-in), 279948 (Dryer Repair Kit), 72032 (Touch-up Paint - Black), 350930 (Spray Paint - 12 oz. - White), 72017 (Touch-Up Paint - White).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on YWED97HEDC1: WPW10631127 (Dryer Control Knob), WPW10316282 (Dryer Top Panel), W10875909 (Dryer Knob), W11590579 (Screw), WPW10208422 (Cover), W11051465 (Hinge), W11233548 (Side Panel (White)), WPW10208383 (Top Panel - White), WPW10208398 (Dryer Cap), W10906551 (Grille and Housing Assembly), W10414388 (Dryer Clip), W10322470A (Drying Rack), WPW10446781 (Dryer Spring).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the dryer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on YWED97HEDC1: W10849080 (Electric Control Board), W10837344 (Wire Harness).

Heat control (thermostats, fuses, heating element)

Symptom: The dryer runs but produces no heat, or it shuts off partway through the cycle.

Check: With the dryer unplugged, check continuity across the part with a multimeter -- no continuity means it has failed. Clear the lint vent first, since a blocked vent is what usually trips a thermal fuse in the first place.

Parts in this group on YWED97HEDC1: 8544771 (Dryer Heating Element), W10693363 (Thermal Fuse), W10909685 (Thermal Fuse), WP8557403 (High Limit Thermostat), 8577274 (Dryer Thermistor).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on YWED97HEDC1: W11364931 (Motor Drive), W10468057 (Dryer Idler Pulley), W10547287 (Dryer Idler Pulley), 8066184 (Dryer Motor Pulley), W10314171 (Dryer Drum Support Roller), 3387610 (Dryer Drive Belt).

Venting and airflow

Symptom: A dryer that needs multiple cycles to dry, runs unusually hot, or repeatedly trips its heat-limit switch.

Check: Clear the lint screen and the full vent run to the outside wall -- a restricted vent is the single most common cause of long dry times and repeat thermal-fuse failures.

Parts in this group on YWED97HEDC1: W11156832 (Lint Screen Door Cover), W10211915 (Dryer Blower Wheel).

Water inlet and drainage

Symptom: The unit isn't getting water when it should, or isn't draining or pumping it out when it should.

Check: Check the valve or pump for a clog or jammed object, and confirm the hose isn't kinked, restricted, or routed higher than the unit allows.

Parts in this group on YWED97HEDC1: W10819173 (Fill Hose).

Before you buy

Match YWED97HEDC1 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Dryer models

These model numbers sort next to this one in the catalog and are usually the same product family.

• YWED97HEDU0 — 55 parts
• YWED97HEDU1 — 49 parts
• YWED97HEDW0 — 52 parts
• YWED97HEDW1 — 64 parts
• YWED97HEXL0 — 41 parts
• YWED97HEDC0 — 61 parts
• YWED97HEDBD1 — 52 parts
• YWED97HEDBD0 — 50 parts
• YWED9750WW0 — 33 parts
• YWED9750WR0 — 32 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.