Parts for WGTLV27HW0 — Whirlpool Washer

We found 18 parts confirmed to fit the Whirlpool Washer WGTLV27HW0.

Compatibility table

All 18 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
W11629601CNTRL-ELEC14 models$160.80
W11409801TIMER15 models$152.37
W11222849VALVE17 models$92.70
W11176112Washer Lid Lock Assembly17 models$103.32
W11189162Door Switch19 models$48.45
W11028744LATCH20 models$124.60
279889VALVE-ASSY47 models$149.36
W11244231Washer Drain Hose77 models$12.48–$26.95
W10821951Damper Assembly84 models
W10815026Washer Actuator146 models
W10721967Washer Drive Pulley442 models$21.38–$38.96
W10006384Washer Drive Belt611 models
W10468057Dryer Idler Pulley1,009 models
3397590Support1,362 models
W10314171Dryer Drum Support Roller2,050 models
279948Dryer Repair Kit2,252 models
694539Dryer Gas Valve Coil Kit3,982 models
694540Dryer Valve Coil Kit3,988 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on WGTLV27HW0: W11629601 (CNTRL-ELEC), W11222849 (VALVE), W11028744 (LATCH), 279889 (VALVE-ASSY), W10821951 (Damper Assembly), 279948 (Dryer Repair Kit), 694539 (Dryer Gas Valve Coil Kit), 694540 (Dryer Valve Coil Kit).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on WGTLV27HW0: W11409801 (TIMER).

Door, lid switches and latches

Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.

Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.

Parts in this group on WGTLV27HW0: W11176112 (Washer Lid Lock Assembly), W11189162 (Door Switch).

Water inlet and drainage

Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.

Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.

Parts in this group on WGTLV27HW0: W11244231 (Washer Drain Hose).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on WGTLV27HW0: W10815026 (Washer Actuator), W10721967 (Washer Drive Pulley), W10006384 (Washer Drive Belt), W10468057 (Dryer Idler Pulley), W10314171 (Dryer Drum Support Roller).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on WGTLV27HW0: 3397590 (Support).

Before you buy

Match WGTLV27HW0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.