Parts for WFW9400SZA10 — Whirlpool Washer

We found 10 parts confirmed to fit the Whirlpool Washer WFW9400SZA10.

Compatibility table

All 10 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
W10100790Clamp8 models
W11417622Switch11 models$84.34
W10117829Water Pump40 models
W10003240Hose46 models
W10003490Clamp49 models
8540751Washer Water Inlet Valve129 models
8540772Latch149 models
8540996Filter173 models
8540025Seal179 models
370450Clamp368 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on WFW9400SZA10: W10100790 (Clamp), W11417622 (Switch), W10003240 (Hose), W10003490 (Clamp), 8540772 (Latch), 8540996 (Filter), 8540025 (Seal), 370450 (Clamp).

Water inlet and drainage

Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.

Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.

Parts in this group on WFW9400SZA10: W10117829 (Water Pump), 8540751 (Washer Water Inlet Valve).

Before you buy

Match WFW9400SZA10 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.