Parts for WF330ANWXAA01 — Washer
We found 11 parts confirmed to fit the Washer WF330ANWXAA01.
Same parts list as WF330ANBXAA00 (Washer). WF330ANWXAA01 shares an identical confirmed parts list with WF330ANBXAA00 (Washer). That page is the canonical version of this parts list — use it if you want the primary reference, or stay here since the list below is exactly the same for WF330ANWXAA01.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| DC6400802C | Washer Door Boot | 49 models | — |
| DC3100112A | Kenmore Washer Motor Rotor | 82 models | — |
| DC3100111A | Samsung Kenmore Washer Drive Motor | 96 models | — |
| DC3100054A | Samsung Washer Drain Pump DC31-00054A | 102 models | $163.59 |
| DC9704981D | Washer Door Boot Spring Clamp | 109 models | — |
| DC6600375A | Door Latch | 123 models | — |
| DC6400519B | Washer Door Lock | 148 models | — |
| DC6900804A | Washer Outer Tub Gasket | 159 models | — |
| DC6600470A | Samsung Washer Shock Absorber | 198 models | — |
| DC3100098A | Washer Motor Rotor Position Sensor | 220 models | — |
| DC6040137A | Washer Bolt | 246 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on WF330ANW/XAA-01: DC6400802C (Washer Door Boot), DC3100112A (Kenmore Washer Motor Rotor), DC6400519B (Washer Door Lock), DC6600470A (Samsung Washer Shock Absorber), DC3100098A (Washer Motor Rotor Position Sensor), DC6040137A (Washer Bolt).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on WF330ANW/XAA-01: DC3100111A (Samsung Kenmore Washer Drive Motor).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on WF330ANW/XAA-01: DC3100054A (Samsung Washer Drain Pump DC31-00054A).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on WF330ANW/XAA-01: DC9704981D (Washer Door Boot Spring Clamp).
Door, lid switches and latches
Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.
Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.
Parts in this group on WF330ANW/XAA-01: DC6600375A (Door Latch).
Door and drum seals
Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.
Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.
Parts in this group on WF330ANW/XAA-01: DC6900804A (Washer Outer Tub Gasket).
Before you buy
Match WF330ANWXAA01 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Other washer models
These model numbers sort close to this one in the catalog for the same appliance type. The brand is not confirmed to match, but the model number range is close.
Other models with this exact parts list
Each model below is confirmed to share the identical compatible-parts list with this one.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.