Parts for WCVH4800K3WW — GE Washer
We found 10 parts confirmed to fit the GE Washer WCVH4800K3WW.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WH11X28637 | GE Washer Drain Pump | This model only | — |
| WH12X10445 | Hall Sensor | 5 models | — |
| WH08X10046 | Tub Seal | 5 models | — |
| WH42X10817 | Washer Control Panel (White) | 5 models | — |
| WH10X10008 | Washer Door Lock | 5 models | — |
| WH45X10092 | Washer Outer Rear Tub Assembly | 5 models | — |
| WH45X10090 | Washer Spin Basket | 5 models | — |
| WH08X10044 | Washer Tub Boot Clamp | 5 models | — |
| WH13X10046 | Washer Water Inlet Valve | 5 models | — |
| WH11X10057 | Laundry Appliance Control Knob | 9 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on WCVH4800K3WW: WH11X28637 (GE Washer Drain Pump), WH13X10046 (Washer Water Inlet Valve).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on WCVH4800K3WW: WH12X10445 (Hall Sensor), WH08X10046 (Tub Seal), WH10X10008 (Washer Door Lock), WH45X10092 (Washer Outer Rear Tub Assembly), WH08X10044 (Washer Tub Boot Clamp).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on WCVH4800K3WW: WH42X10817 (Washer Control Panel (White)), WH11X10057 (Laundry Appliance Control Knob).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on WCVH4800K3WW: WH45X10090 (Washer Spin Basket).
Before you buy
Match WCVH4800K3WW exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring GE Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.