Parts for WA48H7400AWA200 — Samsung Washer
We found 10 parts confirmed to fit the Samsung Washer WA48H7400AWA200.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| DC9715494E | Washer Drive Shaft and Shifter Assembly | 9 models | — |
| DC9716778A | Washer Drain Pump | 30 models | — |
| DC9300236C | Washer Motor Rotor and Stator | 30 models | — |
| DC6600777A | Washer Washplate Cap | 36 models | — |
| DC9717366A | Washer Drain Pump Assembly | 39 models | — |
| DC3100090B | Washer Clutch | 45 models | — |
| DC3100030E | Washer Drain Pump | 47 models | — |
| DC9715459G | Samsung Washer Water Inlet Valve | 63 models | — |
| DC3400025A | Washer Door Lock Assembly | 76 models | — |
| DC3100098A | Washer Motor Rotor Position Sensor | 220 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on WA48H7400AW/A2-00: DC9715494E (Washer Drive Shaft and Shifter Assembly), DC9300236C (Washer Motor Rotor and Stator), DC3100090B (Washer Clutch), DC3400025A (Washer Door Lock Assembly), DC3100098A (Washer Motor Rotor Position Sensor).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on WA48H7400AW/A2-00: DC9716778A (Washer Drain Pump), DC9717366A (Washer Drain Pump Assembly), DC3100030E (Washer Drain Pump), DC9715459G (Samsung Washer Water Inlet Valve).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on WA48H7400AW/A2-00: DC6600777A (Washer Washplate Cap).
Before you buy
Match WA48H7400AWA200 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Samsung Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Other models with this exact parts list
Each model below is confirmed to share the identical compatible-parts list with this one.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.